Behavioral and Electrical Modeling of a 0.5-V Third-Order Continuous-Time Sigma-Delta Modulator with FIR DAC for Audio Applications

Abstract

Most mobile and wearable devices present digital audio signal processing capabilities. Since the nature of audio signals is analog, there is a need to use analog-to-digital converters (ADCs) with high-resolution for a high signal-to-noise ratio audio acquisition. This paper presents the high-level modeling and design of a continuous-time third-order sigma-delta modulator (CT-SDM) with an FIR DAC for audio devices, using a supply voltage of 0.5 V. The design is divided in three steps and is carried out using the Delta-sigma toolbox and a discrete-time to continuous-time (DT-CT) transformation. First, the schematic implementation with verilogA models is done to estimate the first-integrator amplifier specifications for the modulator to provide 14 bits of ENOB. Following, a two-stage inverter-based amplifier is designed and used to verify the design strategy. Finally, a transistor-level implementation of OTAs and comparator is done to evaluate the CT-SDM performance. An in-depth analysis and discussion are presented to explain the achieved results with those transistor-level circuits.