B-line Elastography Measurement of Lung Parenchymal Elasticity

Abstract

This paper proposes a method to determine the elasticity of the lung parenchyma from the B-line Doppler signal observed using continuous shear wave elastography, which uses a small vibrator placed on the tissue surface to propagate continuous shear waves with a vibration frequency of approximately 100 Hz. Since the B-line is generated by multiple reflections in fluid-storing alveoli near the lung surface, the ultrasonic multiple-reflection signal from the B-line is affected by the Doppler shift due to shear waves propagating in the lung parenchyma. When multiple B-lines are observed, the propagation velocity can be estimated by measuring the difference in propagation time between the B-lines. Therefore, continuous shear wave elastography can be used to determine the elasticity of the lung parenchyma by measuring the phase difference of shear wave between the B-lines. In this study, three elastic sponges (soft, medium, and hard) with embedded glass beads were used to simulate fluid-storing alveoli. Shear wave velocity measured using the proposed method was compared with that calculated using Young’s modulus obtained from compression measurement. Using the proposed method, the measured shear wave velocities (mean ± S.D.) were 3.78 ± 0.23, 4.24 ± 0.12, and 5.06 ± 0.05 m/s for soft, medium, and hard sponges, respectively, which deviated by a maximum of 5.37% from the values calculated using the measured Young’s moduli. The shear wave velocities of the sponge phantom were in a velocity range similar to the mean shear wave velocities of healthy and diseased lungs reported by magnetic resonance elastography (3.25 and 4.54 m/s, respectively). B-line elastography may enable emergency diagnoses of acute lung disease using portable ultrasonic echo devices.

Bubble cavitation generation near blood vessel walls using amplitude-modulated wave irradiation

“…Amplitude modulation was used to produce the pump-US irradiation sequence satisfying the λ env /4 = d resonance condition. 22,23) Generally, an amplitude-modulated wave is created using a signal wave frequency that is relatively low compared with that of the carrier wave. Here, the carrier frequency is the center frequency of the pump-US.…”

“…Therefore, we focused on generating amplitude-modulated waves that can spatio-temporally control the sound pressure distribution in blood vessels. 22,23) A high-efficiency irradiation sequence using an amplitude-modulated wave is expected to improve the efficiency of sonoporation and prolong the duration of bubble collapse. The purpose of this study was to examine the effects of an amplitude-modulated wave irradiation sequence using optical imaging and measurement of ACE signals.…”

Sono-Elastography: An Ultrasound Quantitative Non-Invasive Measurement to Guide Bacterial Pneumonia Diagnosis in Children

“…In a recent publication, Koda et al described an experimental lung model in which continuous shear wave elastography was used to determine the elasticity of lung tissue by measuring the shear wave phase difference between the B-lines observed by LUS [ 43 ]. The Mayo Clinic research group has published several research papers on the use of SE to assess interstitial lung pathology.…”