Attomole protein analysis by CIEF with LIF detection

Abstract

We have coupled CIEF with an LIF detector that is based on a post-column sheath flow cuvette. We employed Chromeo P503 as a fluorogenic reagent to label proteins before analysis. This reagent reacts with the epsilon-amine of lysine residues, preserving the cationic nature of the residue; labeled proteins generate extremely sharp peaks in CIEF. A set of four standard proteins generated a linear relationship between migration time and pI. A protein homogenate prepared from a Barrett's esophagus cell line resolved over 100 components in a 40 min separation. Detection limits for Chromeo P503-labeled beta-lactoglobulin were 5 amol injected into the capillary. Fluorescent impurities present in the ampholytes generated a large background signal that degraded the detection limit by four orders of magnitude compared with other forms of capillary electrophoresis with this detector.

Capillary array isoelectric focusing with laser-induced fluorescence detection: milli-pH unit resolution and yoctomole mass detection limits in a 32-channel system

“…We have employed these reagents for ultrasensitive fluorescence detection in capillary isoelectric focusing with excellent resolution. 12-13 …”

Recent advances in the analysis of therapeutic proteins by capillary and microchip electrophoresis

“…This approach requires not only that the tag is specific for the functional group on the analyte of interest but also that it does not interfere with the separation by introducing additional fluorescent by-products. Proteins typically have several reactive sites that can be labeled which leads to multiple peaks for one analyte, complicating data analysis [85]. …”

Protein separation by capillary gel electrophoresis: A review

“…This labeling reaction produces a mixture in which some proteins are un-labeled, some are fully-labeled, while the majority is partially-labeled. This mixture will cause peak-broadening or even multiple peaks in CE separations [108]. A postcolumn labeling method is often a good approach to address this problem.…”