Assessment on Performance-properties of Asymmetric Nanofiltration Membranes from Polyethersulfone/n-Methyl-2-pyrrolidone/water Blends with Poly(vinyl pyrrolidone) as Additive

Self Cite

The roles of polyvinyl-pyrrolidone (PVP) additive in the tailoring of pores, pore size distribution, morphologies and molecular weight cut-off (MWCO) in phase inversion asymmetric nanofiltration membranes was addressed. Using established solute transport method, scanning electron microscopy (SEM) and Minitab software, details analysis of the enhanced performance-properties of narrow pores nanofiltration membranes were verified. Experimental and analysis data revealed that the membranes prepared with 2 wt% of PVP demonstrated fine performance-properties. At this concentration, the fabricated nanofiltration membranes possessed narrow pore size and molecular weight cut-off of 1.14 nm and 2290 Da, respectively. In addition, the fabricated nanofiltration membranes displayed fine structural details of narrow pore size distribution, good morphology and critical key properties. With the combinations of thinner skin layer, fine structures and narrow pores, it can be concluded that the 2 wt% of PVP is the optimum PVP concentration to produce selective narrow pore nanofiltration membranes. Eventually, summary data on pores, pore size distributions (PSDs) and key properties proved that the PVP additive is effective for controlling performances-properties and structural details in asymmetrical based membranes.

Section: Nanofiltration Separation Test and Morphologiessupporting

confidence: 90%

Section: Materials and Methods 21 Chemicalsmentioning

confidence: 99%

Section: Morphology and Pores Characteristicsmentioning

confidence: 99%

Section: Nanofiltration Separation Test and Morphologiesmentioning

confidence: 99%

See 2 more Smart Citations

Tailoring of Narrow Pores, Pore Size Distribution and Structural Details in Asymmetric Nanofiltration Membranes via Polyvinyl-pyrrolidone Additive

Safari

Rozali²,

Hassan³

et al. 2022

Self Cite

“…The nanocomposite polymeric membranes show a volume dilatation. An increase in the nanoparticles added significantly stimulated the development of aggregates of MgO on the membrane surface; which in turn formed a larger macro-voids and exhibiting finger-like structures [27][28][29][30] as a result of the volume dilatation that ensued during fabrication. The SEM images also depicted pore-like structures (nano-porosity) on the membrane surfaces; which appeared to be formed in the course of the membrane synthesis, and it was enhanced with an increase in MgO nanoparticles (Fig.…”

Section: Scanning Electron Microscopy Characterizationmentioning

confidence: 99%

Synthesis of PET-Magnesium Oxide-Chitosan Nanocomposite Membranes for the Dehydration of Natural Gas

Agboola

Oginni

Oladokun

et al. 2023

Flat thin-film magnesium oxide-chitosan nanocomposite membranes were synthesized with polyethylene terephthalate (PET) and employed for natural gas dehydration. The water vapor permeation was most pronounced with a nanocomposite membrane doped with 0.9 g MgO nanoparticles (NP) as a result of a significant upsurge in the permeability of water vapor in the membrane (0.87). With the increase in MgO NP, large macro-voids are created, substratum pore size, and thickness together with the water vapor permeation were upsurged. The dehydration of natural gas performance of magnesium oxide-chitosan nanocomposite membranes synthesized with PET was enhanced with the increase in MgO NP embedded in the membrane. Though water vapor permeation was restricted by the polyester non-woven material used as a support for the nano composite membranes, as the three membranes did not reach the permeation coefficient of 1. However, the permeation coefficient increased with an increased MgO NP, with three mambrane samples (M1, M2 and M3) having permeation coefficient of 0.763, 0.77 and 0.87 respectively. The gas reduced with an increase MgO NP, with M1, M2 and M3 having 3.46×10−2, 3.17×10−2 and 3.88×10−3 kg/m3 respectively. From the adsorption study, the discrepancy observed between CH4 and vapor with isotherm models was ascribed to the different adsorption behavior of CH4 and vapor on the membrane-active area. The cost of making the membrane cannot be considered as a terminal criterion because most of the cost-effective option is not always the optimum one. The membranes confirmed their suitability for the dehydration of natural gas.

Elucidation on Performance and Structural Properties of Skinned Asymmetric Nanofiltration Membrane Based on Theoretical Models

Rozali

Safari

Hassan

et al. 2023

In this study, the performance and structural properties of enhanced skinned asymmetric nanofiltration (NF) membranes were experimentally and theoretically analyzed. Based on Donnan and steric-hindrance transport mechanism, the relationship of performances and key properties of the fabricated nanofiltration membranes were examined. At the optimum concentration of polymer, the skinned nanofiltration membranes achieved high salt rejection up to 85% and high solutes separation efficacy. Moreover, morphological and modeling analysis discovered that, the optimum membranes produced good pore size and fine key properties with 1.20 nm of pore radius, 4.96 µm of ratio of thickness to porosity (∆x/Ak) and −1.56 of surface charge, ζ as well as uniform pore size distributions. The findings from this study proved that the strategic utilization and manipulation of good membranes material is a simple and good attempt to upgrade the membranes capability and usability which lead towards the application in various membrane separation processes.