Assessment of the Applicability of UAV for the Creation of Digital Surface Model of a Small Peatland

Abstract

Rapid development and growing availability of Unmanned Aerial Vehicles (UAV) translates into their more wide-spread application in monitoring of the natural environment. Moreover, advances in computer analysis techniques allow the imaging performed with UAVs to be used in creating Digital Elevation Models (DEM) and Digital Surface Models (DSM). DEMs are often employed in studies on geology, environment, engineering, and architecture. The presented paper discusses the procedures enabling the making of a precise DEM, discusses the aerial imaging data processing technique as well as determines the accuracy of obtained products in comparison with an existing Digital Elevation Model. Based on available literature the author indicates four sets of input parameters applicable in UAV imaging. Data collection missions were performed on two separate days in the area of a small peatland located in the Tuchola Pinewood, Poland. The study aims to address two research issues. Firstly, the author investigates the possibility of creating a DSM based on UAV imaging performed under unfavorable conditions and indicates whether results obtained via this method display sufficient quality to be seen as an alternative to the traditional surveying techniques (LiDAR). Secondly, the article determines the input parameters for a photogrammetric flight that ensure the highest accuracy of a resulting DSM. The analyses show a strong positive correlation between the DSMs prepared based on UAV imaging with data obtained by means of traditional methods (LiDAR). Mean correlation coefficient ranged from 0.45 to 0.75 depending on the type of land use and input parameters selected for a given flight. Furthermore, the analysis revealed that DSMs prepared based on UAV imaging—provided the most suitable input parameters are selected—can be a viable alternative to standard measurements, with the added benefit of low cost and the capacity for repeatable data collection in time. Admittedly, the method in question cannot be utilized in relation to peatlands overgrown with high vegetation (trees, shrubs) as it effectively diminishes the accuracy of obtained DSMs.

Unveiling the Past: Deep-Learning-Based Estimation of Historical Peatland Distribution

“…Through the identification of the steepest descent direction for each cell, the aspect aids our understanding of peatland ecological processes. The integration of slope and aspect paints a comprehensive picture of peatland terrains, elucidating how variations in topography and orientations influence the intricate balance of ecosystems and human settlements within these environments [28].…”

Challenges and Limitations of Remote Sensing Applications in Northern Peatlands: Present and Future Prospects

“…UAV-based remote sensing involves sensors on small, unmanned aircraft (drones). It has emerged as a versatile tool for peatland research, enabling ultra-high-resolution mapping and monitoring [46]. UAVs offer several benefits for peatland applications, including low cost, ultra-high spatial and temporal resolution, and access to difficultto-reach areas.…”

Improving the Spatial Accuracy of UAV Platforms Using Direct Georeferencing Methods: An Application for Steep Slopes

“…Today, unmanned aerial vehicles (UAVs) are widely used as a tool for mapping and modeling the Earth for various disciplines [1]. UAVs, also known as unmanned aerial systems (UAS) or remotely piloted aircraft systems (RPAS), are pilotless aircraft that can be operated remotely [2,3].…”