Assessment of refining efficiency during the refining cycle in a foundry degassing unit in industrial conditions

Abstract

The article focuses on the issue of improving the efficiency of a Foundry Degassing Unit (FDU) via operational testing of aluminium alloys during casting at MOTOR JIKOV Slévárna a.s.. As part of the research, the efficiency of the refining process in the FDU was assessed. The main emphasis was placed on determining the moment of the greatest decrease in the hydrogen content in the melt and whether it is possible to shorten the refining cycle. The values of the Dichte Index were determined, on the basis of which the degassing curve was plotted and the progress of the melt degassing was assessed. To ensure the required quality of castings, the maximum allowable value of the Dichte Index ranged from 3 to 4%. During the process, the temperature drop during the refining cycle was also determined. The total temperature drop from pouring the melt into the ladle to the end of refining ranged from 26 to 32 °C, which is within the acceptable limits of the foundry. Based on the knowledge resulting from the operational experiments, recommendations were formulated to optimize the refining technology at the FDU for the MOTOR JIKOV Slévárna a.s. foundry.

The Separation Behavior of TiB2 during Cl2-Free Degassing Treatment of 5083 Aluminum Melt

“…Degassing treatment is often seen as a critical step for melt treatment [11][12][13]. Being performed via batch degassers or in-line degassing stations, the beneficial effects of degassing treatment with regard to H 2 and alkali metal removal have been well acknowledged [14].…”