Assessment and treatment of pectus deformities: a review of reverse engineering and 3D printing techniques

Abstract

Purpose Among thoracic malformations, pectus deformities have the highest incidence and can result in a wide range of severe and mild clinical manifestations. Recently, the treatment of pectus deformities is shifting from traditional approaches toward customized solutions. This occurs by leveraging innovative rapid prototyping tools that allow for the design and fabrication of patient-specific treatments and medical devices. This paper aims to provide a comprehensive view of the growing literature in this area to analyze the progress made in this direction. Design/methodology/approach The search was performed on major search engines through keywords inherent to reverse engineering (RE) and additive manufacturing (AM) technologies applied to pectus deformities and related treatments, selecting 54 papers. These were analyzed according to the addressed pathology, the hardware and software tools used and/or implemented and their integration within the clinical pathway. Findings First, the analysis led to analyze and divide the papers according to how RE and AM technologies are applied for surgical and non-surgical treatments, pathological assessment and preoperative simulation and planning. Second, all papers were considered within the typical rapid prototyping framework consisting of the three phases of three-dimensional (3D) scanning, 3D modelling and 3D printing. Originality/value To the best of the authors’ knowledge, to date, no survey has provided a comprehensive view of innovative and personalized treatment strategies for thoracic malformations; the present work fills this gap, allowing researchers in this field to have access to the most promising findings on the treatment and evaluation of pathology.

Research Progress of Food-Grade High Internal Phase Pickering Emulsions and Their Application in 3D Printing

“…Meanwhile, the apparent viscosity tends to decrease as shear rate increases, indicating that HIPPE is a pseudoplastic fluid with shear thinning behavior [ 9 ]. As a new technology, 3D printing is widely used in the aerospace and medical fields, such as for realizing the customization of fine medical models, printing high-temperature parts with metallic powder, and so on [ 10 , 11 , 12 ]. Additionally, 3D printing has boomed in the food sector in recent years.…”

The Influence of Ni Content on the Microstructure and Impact Wear Resistance Performance of High-Chromium Casting Infiltration Coating

“…A wearresistant casting infiltration coating (CIC) with a thickness greater than 5 mm is simultaneously formed at the casting surface. Compared with 3D printing techniques [12][13][14][15], this method is usually utilized for parts with simpler construction, and the cost is much lower.…”