Artificial Intelligence Investigation on (Al‐Si‐Fe) Alloy Reinforced with Nanoceramic Particles by RSM

Abstract

Al 4043 alloy is extensively used as a filler material for welding aluminum alloys, especially when welding alloys from the Al 6000 series. It is utilized in aerospace and automotive structural components. For longer life in automotive applications, the wear resistance of Al 4043 alloy must be improved. According to research, tungsten carbide has good wear resistance. In this research, Al 4043 alloy is reinforced with varying percentages (1, 3, and 5%) of nano-sized tungsten carbide to increase wear resistance. Taguchi L27 orthogonal array is employed for the wear analysis. The Taguchi signal-to-noise ratio is used to determine the optimal parameters for minimizing wear and coefficient of friction. The regression model and artificial neural network are developed to predict the experimental results. The outcomes of the regression model and artificial neural network are compared to the experimental results to demonstrate both models’ efficacy. A confirmation test was carried out for the optimal process parameter. The result shows that the minimized specific wear rate of 0.12 mm3/Nm, coefficient of friction of 0.01, and frictional force of 1.02 N are achieved at the optimal combination.

Performance evaluation and conservation of waste solid plastics into alternative fuel for a pollution‐free environment

“…The numerical simulations of coupled solid‐phase reactions in pyrolysis and the gas‐phase reaction were conducted using a 3‐directional fluid dynamics‐based fire model (Farshi & Ravishankar, 2016). Researchers developed a pyrolysis model using computational fluid dynamics simulation and calculated the reactor's stoichiometric coefficient (Kanna et al., 2022). Using the simulation technique, the experimental data of the pyrolysis reactor and evaluate the impact of gasifying agent temperature, soil moisture content, and fuel heating value.…”

Sustainable development and conservation of agro‐waste coconut shell powder strengthen lightweight aluminum bio‐composite for user friendly

“…In the past decades, aluminum alloy composite enhanced with SiC, Al 2 O 3 , TiO 2 , graphite, and SiO 2 has found expensive fabrication costs and limited applications of aerospace and automobile components (Ali et al., 2022; Awasthi et al., 2018; Bisane et al., 2015). To overcome the above drawback of fabrication cost of composite to be reduced by the additions of the natural organic agro waste and indusial waste metals into aluminum alloy matrix attained enhanced mechanical and tribological characteristics in various engineering applications (Kanna et al., 2022; Mohana Krishnan et al., 2022; Soltani et al., 2017). Chemical suitability and composite phases (matrix/reinforcement) interface were investigated (Tiwari & Pradhan, 2017).…”