Arrays of suspended silicon nanowires defined by ion beam implantation: mechanical coupling and combination with CMOS technology

Abstract

We present the fabrication, operation, and CMOS integration of arrays of suspended silicon nanowires (SiNWs). The functional structures are obtained by a top-down fabrication approach consisting in a resistless process based on focused ion beam irradiation, causing local gallium implantation and silicon amorphization, plus selective silicon etching by tetramethylammonium hydroxide, and a thermal annealing process in a boron rich atmosphere. The last step enables the electrical functionality of the irradiated material. Doubly clamped silicon beams are fabricated by this method. The electrical readout of their mechanical response can be addressed by a frequency down-mixing detection technique thanks to an enhanced piezoresistive transduction mechanism. Three specific aspects are discussed: (i) the engineering of mechanically coupled SiNWs, by making use of the nanometer scale overhang that it is inherently-generated with this fabrication process, (ii) the statistical distribution of patterned lateral dimensions when fabricating large arrays of identical devices, and (iii) the compatibility of the patterning methodology with CMOS circuits. Our results suggest that the application of this method to the integration of large arrays of suspended SiNWs with CMOS circuitry is interesting in view of applications such as advanced radio frequency band pass filters and ultra-high-sensitivity mass sensors.

Silicon Nanowires Driving Miniaturization of Microelectromechanical Systems Physical Sensors: A Review

“…[45] Copyright 2020, IEEE. crystal orientation-dependent, selective wet etch by KOH, [55][56][57][58] TMAH, [59][60][61][62][63][64][65][66][67] or anisotropic dry etch by RIE, [68] or DRIE [69] are used for this purpose.…”

Physical Cues of Matrices Reeducate Nerve Cells

“…After the Piezo2-related genes were knocked out, the nerve cells lost their ability to respond to the stimulus. When the Piezo2b gene fragment was specifically knocked out during the embryo stage, zebrafish lost almost all light tactile responses, suggesting that Piezo2 mediates both the pain and the tactile response to the mechanical stimulus ( Llobet et al, 2018 ). Moreover, after blocking the expression of Piezo2 via small interfering RNA interference, dorsal root ganglion cells lost their ability to respond to the fast stimulus, suggesting that the expression of Piezo2 controls the generation of the fast adaptive current mediated by the mechanical stimulus.…”

Exploring nanowire regrowth for the integration of bottom-up grown silicon nanowires into AFM scanning probes

“…Silicon nitride, for example, is of interest in this context. The key challenge for the fabrication of a single, three dimensionally oriented and localized SiNW is however the nanoscale confinement of the catalyst particle, which demands, for instance, complex and high-cost electron beam lithography or focused ion or electron beam induced deposition of the catalyst material [10,30,31]. A simple but capable technique for the catalyst deposition and confinement was shown by Engstrom et al [14] by implementing so-called stencil masks in combination with an evaporated catalyst material.…”