Search citation statements
Paper Sections
Citation Types
Year Published
Publication Types
Relationship
Authors
Journals
Gas-induced geodynamic phenomena can occur during underground mining operations if the porous structure of the rock is filled with gas at high pressure. In such cases, the original compact rock structure disintegrates into grains of small dimensions, which are then transported along the mine working space. Such geodynamic events, particularly outbursts of gas and rock, pose a danger both to the life of miners and to the functioning of the mine infrastructure. These incidents are rare in copper ore mining, but they have recently begun to occur, and have not yet been fully investigated. To ensure the safety of mining operations, it is necessary to determine parameters of the rock–gas system for which the energy of the gas will be smaller than the work required to disintegrate and transport the rock. Such a comparison is referred to as an energy balance and serves as a starting point for all engineering analyses. During mining operations, the equilibrium of the rock–gas system is disturbed, and the rapid destruction of the rock is initiated together with sudden decompression of the gas contained in its porous structure. The disintegrated rock is then transported along the mine working space in a stream of released gas. Estimation of the energy of the gas requires investigation of the type of thermodynamic transformation involved in the process. In this case, adiabatic transformation would mean that the gas, cooled in the course of decompression, remains at a temperature significantly lower than that of the surrounding rocks throughout the process. However, if we assume that the transformation is isothermal, then the cooled gas will heat up to the original temperature of the rock in a very short time (<1 s). Because the quantity of energy in the case of isothermal transformation is almost three times as high as in the adiabatic case, obtaining the correct energy balance for gas-induced geodynamic phenomena requires detailed analysis of this question. For this purpose, a unique experimental study was carried out to determine the time required for heat exchange in conditions of very rapid flows of gas around rock grains of different sizes. Numerical simulations reproducing the experiments were also designed. The results of the experiment and the simulation were in good agreement, indicating a very fast rate of heat exchange. Taking account of the parameters of the experiment, the thermodynamic transformation may be considered to be close to isothermal.
Gas-induced geodynamic phenomena can occur during underground mining operations if the porous structure of the rock is filled with gas at high pressure. In such cases, the original compact rock structure disintegrates into grains of small dimensions, which are then transported along the mine working space. Such geodynamic events, particularly outbursts of gas and rock, pose a danger both to the life of miners and to the functioning of the mine infrastructure. These incidents are rare in copper ore mining, but they have recently begun to occur, and have not yet been fully investigated. To ensure the safety of mining operations, it is necessary to determine parameters of the rock–gas system for which the energy of the gas will be smaller than the work required to disintegrate and transport the rock. Such a comparison is referred to as an energy balance and serves as a starting point for all engineering analyses. During mining operations, the equilibrium of the rock–gas system is disturbed, and the rapid destruction of the rock is initiated together with sudden decompression of the gas contained in its porous structure. The disintegrated rock is then transported along the mine working space in a stream of released gas. Estimation of the energy of the gas requires investigation of the type of thermodynamic transformation involved in the process. In this case, adiabatic transformation would mean that the gas, cooled in the course of decompression, remains at a temperature significantly lower than that of the surrounding rocks throughout the process. However, if we assume that the transformation is isothermal, then the cooled gas will heat up to the original temperature of the rock in a very short time (<1 s). Because the quantity of energy in the case of isothermal transformation is almost three times as high as in the adiabatic case, obtaining the correct energy balance for gas-induced geodynamic phenomena requires detailed analysis of this question. For this purpose, a unique experimental study was carried out to determine the time required for heat exchange in conditions of very rapid flows of gas around rock grains of different sizes. Numerical simulations reproducing the experiments were also designed. The results of the experiment and the simulation were in good agreement, indicating a very fast rate of heat exchange. Taking account of the parameters of the experiment, the thermodynamic transformation may be considered to be close to isothermal.
Copper raw materials have not been identified as a critical raw material for the economy of the European Union (EU). Demand for metal for use within the EU is satisfied mainly by imports of raw materials in various processing stages and from recycling. Imports include not only copper concentrates, but also refined metals, alloys, and intermediate and finished products. In terms of EU imports, mining supplies represent a minor share of demand. It is likely that copper demand will grow in the coming decades and that global as well as European reserves of copper will be depleted more rapidly. For Europe, no complete and harmonised dataset presenting estimates of total EU copper resources and reserves exists, with the exception of the attempted Minerals4EU project. In colloquial language, many imprecise concepts aim at describing reality. Classic probability tools cannot be used to describe imperfect information. There are no sharp thresholds between the boundaries of many measurements; instead, smooth transitions are observed. This gradation between full and partial membership and non-membership is not included in classical set theory; thus, the capacity for describing such effects is provided by fuzzy set theory. An attempt is made in the present paper at a fuzzy description of the copper reserve base in the EU countries. The basic terminology of fuzzy sets is presented and useful logical operators are indicated. The copper reserve base in the EU countries was assessed in relation to world reserves and an appraisal of this base within these countries was carried out.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.