Applied Measurement Systems

In this study, a critical evaluation of analyte dielectric properties in a microvolume was undertaken, using a microwave biochemical sensor based on a circular substrate integrated waveguide (CSIW) topology. These dielectric properties were numerically investigated based on the resonant perturbation method, as this method provides the best sensing performance as a real-time biochemical detector. To validate these findings, shifts of the resonant frequency in the presence of aqueous solvents were compared with an ideal permittivity. The sensor prototype required a 2.5 µL volume of the liquid sample each time, which still offered an overall accuracy of better than 99.06%, with an average error measurement of ±0.44%, compared with the commercial and ideal permittivity values. The unloaded Q u factor of the circular substrate-integrated waveguide (CSIW) sensor achieved more than 400 to ensure a precise measurement. At 4.4 GHz, a good agreement was observed between simulated and measured results within a broad frequency range, from 1 to 6 GHz. The proposed sensor, therefore, offers high sensitivity detection, a simple structural design, a fast-sensing response, and cost-effectiveness. The proposed sensor in this study will facilitate real improvements in any material characterization applications such as pharmaceutical, bio-sensing, and food processing applications.

show abstract

Comparison of Cylinder Pressure Measurements on a Heavy-Duty Diesel Engine Using a Switching Adapter

Dempsey

Seiler

Johnson³

2019

Journal of Engineering for Gas Turbines and Power

View full text Add to dashboard Cite

In this study, a variety of piezoelectric pressure transducer designs and mounting configurations were compared for measuring in-cylinder pressure on a heavy-duty single-cylinder diesel engine. A unique cylinder head design was used which allowed cylinder pressure to be measured simultaneously in two locations. In one location, various piezoelectric pressure transducers and mounting configurations were studied. In the other location, a Kistler water-cooled switching adapter with a piezoresistive pressure sensor was used. The switching adapter measured in-cylinder pressure during the low-pressure portion of the cycle. During the high-pressure portion of the cycle the sensor is protected from the high-pressure and high-temperature gases in the cylinder. Therefore, the piezoresistive sensor measured in-cylinder pressure highly accurately, without the impacts of short-term thermal drift, otherwise known as thermal shock. Additionally, the piezoresistive sensor is an absolute pressure sensor which does not require a baseline or “pegging” on every engine cycle. With this measurement setup, the amount of thermal shock and induced measurement variability was accurately assessed for the piezoelectric sensors. Data analysis techniques for quantifying the accuracy of a piezoelectric cylinder pressure measurement are also presented and discussed. It was observed that all the piezoelectric transducers investigated yielded very similar results regarding compression pressure, start of combustion, peak cylinder pressure, and the overall heat release rate shape. Differences emerged when studying the impact of the transducer mounting (e.g., recessed versus flush-mount). Recessed-mount transducers tended to yield a more accurate measurement of the cycle-to-cycle variability when compared to the baseline piezoresistive sensor. This is thought to be due to reduced levels of thermal shock, which can vary from cycle-to-cycle.

show abstract

Applied Measurement Systems

Cited by 15 publications

References 69 publications

Diagnostic Criteria for the Signal of the First-Order Derivative of Diesel Engine in-Cylinder Pressure

Diagnostic Criteria for the Signal of the First-Order Derivative of Diesel Engine in-Cylinder Pressure

Real Time Microwave Biochemical Sensor Based on Circular SIW Approach for Aqueous Dielectric Detection

Comparison of Cylinder Pressure Measurements on a Heavy-Duty Diesel Engine Using a Switching Adapter

Contact Info

Product

Resources

About