Applications of Lignocellulosic Fibers and Lignin in Bioplastics: A Review

Abstract

Lignocellulosic fibers and lignin are two of the most important natural bioresources in the world. They show tremendous potential to decrease energy utilization/pollution and improve biodegradability by replacing synthetic fibers in bioplastics. The compatibility between the fiber-matrix plays an important part in the properties of the bioplastics. The improvement of lignocellulosic fiber properties by most surface treatments generally removes lignin. Due to the environmental pollution and high cost of cellulose modification, focus has been directed toward the use of lignocellulosic fibers in bioplastics. In addition, lignin-reinforced bioplastics are fabricated with varying success. These applications confirm there is no need to remove lignin from lignocellulosic fibers when preparing the bioplastics from a technical point of view. In this review, characterizations of lignocellulosic fibers and lignin related to their applications in bioplastics are covered. Then, we generalize the developments and problems of lignin-reinforced bioplastics and modification of lignin to improve the interaction of lignin-matrix. As for lignocellulosic fiber-reinforced bioplastics, we place importance on the low compatibility of the lignocellulosic fiber–matrix. The applications of lignin-containing cellulose and lignocellulosic fibers without delignification in the bioplastics are reviewed. A comparison between lignocellulosic fibers and lignin in the bioplastics is given.

XPS and FTIR Studies of DC Reactive Magnetron Sputtered TiO2 Thin Films on Natural Based-Cellulose Fibers

“…Environmental concerns over global warming have encouraged academics to find new eco-friendly materials [1,2]. The huge advantages of natural based-cellulose fibers (NBCF)-such as low cost, biodegradability, abundance, and light weight-have already led to the replacement of synthetic fibers by natural ones in some cases.…”

Surface treatment of eucalyptus wood for improved HDPE composites properties

“…Therefore, chemical treatment of the fibers is normally required. In fact there are many reports available in the literature reviewing the use of treated biomass resources to produce composites . Sodium chlorite treatment, treatment with methacrylate, acetylation, etherification, enzymatic treatment, peroxide treatments, plasma treatment, ozone treatments or grafting are some of the chemical modifications used to exploit the full potential of lignocellulosic fibers .…”

Vegetable Additives in Food Packaging Polymeric Materials

“…The use of natural fibers expanded due to the higher prices for petroleum products but also supported by the acceptance among consumers who encourage the use of renewable and nonpolluting raw and waste materials [12]. As reinforcements in bioplastics, lignocellulosic fibers are biodegradable, renewable, and widely available; moreover, they have low density, competitive specific mechanical properties, and a relatively low cost [76,77]. Various polyolefins, polylactic acid, Cellulose, the most abundant biopolymer in nature, has promising uses as reinforcement of mechanical properties in polymeric bionanocomposites.…”