Application of the Tracer Test in a Hydrogeological Survey for a Pumped Storage Power Station

Abstract

In areas with complex hydrogeological conditions, the tracer test method is often used as an effective means in hydrogeological surveys. According to the results of tracer tests, hydrogeological parameters, including hydraulic gradient and permeability coefficient, fracture network leakage passages and their scale, and groundwater flow rate and direction can be quantitatively determined. This paper takes the upper reservoir of Yongxin Pumped Storage Power Station in Jiangxi Province as the research object, and focuses on the complex hydrogeological conditions of the upper reservoir. Three sets of tracer tests and multiple sets of single-hole flow rate and direction tests were conducted on the left and right banks of the reservoir and near surface gullies. The results showed that ZKS18 received tracers in all three tests, which indicates a close hydraulic connection between ZKS18 and the left bank, right bank, and surface gullies within the reservoir. Based on the single or multiple peak values of the tracer, it was determined that there are 1–6 leakage passages in the fractured rocks, with leakage passage sizes of 0.1–0.4 mm. According to the single-hole flow rate and flow direction tests, a self-developed instrument was used to determine the groundwater flow rate and flow direction at different depths in the test holes, which yielded results that were basically consistent with the results of the three-hole method. These results provide a basis for the use of tracer tests in hydrogeological surveys for water conservancy and hydropower engineering, and anti-seepage design of upper reservoirs.