2020
DOI: 10.1016/j.ijbiomac.2020.07.188
|View full text |Cite
|
Sign up to set email alerts
|

Application of the Fe3O4-chitosan nano-adsorbent for the adsorption of metronidazole from wastewater: Optimization, kinetic, thermodynamic and equilibrium studies

Help me understand this report

Search citation statements

Order By: Relevance

Paper Sections

Select...
3
2

Citation Types

2
17
0
1

Year Published

2021
2021
2024
2024

Publication Types

Select...
9

Relationship

0
9

Authors

Journals

citations
Cited by 88 publications
(22 citation statements)
references
References 56 publications
2
17
0
1
Order By: Relevance
“…Our data are similar with those reported by Adel Niaei and Rostamizadeh (2020) [ 46 ], who performed the adsorption of metformin on zeolites and showed that the removal percentage improves from 61.1% to more than 95% by increasing the amount of adsorbent from 0.5 g/L to 1.1 g/L. An adsorbent dosage of 2 g/L was found to be adequate also for the retention of metronidazole from wastewater [ 47 ]. Based on these aspects, the middle biosorbent dose (2 g/L) was considered a good compromise between the consumption of adsorbent material and the removal of EL from tested solutions.…”
Section: Resultssupporting
confidence: 90%
“…Our data are similar with those reported by Adel Niaei and Rostamizadeh (2020) [ 46 ], who performed the adsorption of metformin on zeolites and showed that the removal percentage improves from 61.1% to more than 95% by increasing the amount of adsorbent from 0.5 g/L to 1.1 g/L. An adsorbent dosage of 2 g/L was found to be adequate also for the retention of metronidazole from wastewater [ 47 ]. Based on these aspects, the middle biosorbent dose (2 g/L) was considered a good compromise between the consumption of adsorbent material and the removal of EL from tested solutions.…”
Section: Resultssupporting
confidence: 90%
“…However, our results did not show the chitosan layer as seen by Akin et al [19], so the chitosan probably contributed. In another study [21], after the dissolution of Another way of analyzing the surface of nanoparticles is from zeta potential measurements. The graph in Fig.…”
Section: Resultsmentioning
confidence: 99%
“…Knowing the reaction mechanism during the functionalization process is important to understand the potential future reactions of the functionalized nanoparticles. Several studies present the reaction mechanism of the functionalization of Fe 3 O 4 nanoparticles with chitosan using glutaraldehyde [18] and sodium polyphosphate [19,20] as the new cross-linkers and other forms of chitosan functionalization on Fe 3 O 4 nanoparticles [21,22]. Due to the lack of information regarding the use of NaOH as a cross-linking agent in the functionalization mechanism, this study aimed to synthesize and characterize Fe 3 O 4 nanoparticles functionalized with APTMS and later with chitosan.…”
Section: Introductionmentioning
confidence: 99%
“…14,15 This versatile and cost-effective method is usually characterized by low energy consumption with a limited use or production of harmful products and auxiliary materials. 16,17 Various adsorbents have been utilized for MNZ adsorption, among which pristine and modified sepiolite, 18 microorganism-activated carbon, 19 carbon-based substances, 19,20 a Department of Civil and Environment Engineering, Shahrood University of urea and melamine-modified MOF MIL-101-(Cr), 4 carbon xerogel/ graphene hybrids, 21 Fe 3 O 4 /cellulose nanocomposites, 22 the Fe 3 O 4chitosan nano-adsorbent 23 and the PPY-PANi copolymer 24 can be mentioned.…”
Section: Introductionmentioning
confidence: 99%