Application of the DMD Approach to High-Reynolds-Number Flow over an Idealized Ground Vehicle

Abstract

This paper attempts to develop a Dynamic Mode Decomposition (DMD)-based Reduced Order Model (ROMs) that can quickly but accurately predict the forces and moments experienced by a road vehicle such that they be used by an on-board controller to determine the vehicle’s trajectory. DMD can linearize a large dataset of high-dimensional measurements by decomposing them into low-dimensional coherent structures and associated time dynamics. This ROM can then also be applied to predict the future state of the fluid flow. Existing literature on DMD is limited to low Reynolds number applications. This paper presents DMD analyses of the flow around an idealized road vehicle, called the Ahmed body, at a Reynolds number of 2.7×106. The high-dimensional dataset used in this paper was collected from a computational fluid dynamics (CFD) simulation performed using the Menter’s Shear Stress Transport (SST) turbulence model within the context of Improved Delayed Detached Eddy Simulations (IDDES). The DMD algorithm, as available in the literature, was found to suffer nonphysical dampening of the medium-to-high frequency modes. Enhancements to the existing algorithm were explored, and a modified DMD approach is presented in this paper, which includes: (a) a requirement of higher sampling rate to obtain a higher resolution of data, and (b) a custom filtration process to remove spurious modes. The modified DMD algorithm thus developed was applied to the high-Reynolds-number, separation-dominated flow past the idealized ground vehicle. The effectiveness of the modified algorithm was tested by comparing future predictions of force and moment coefficients as predicted by the DMD-based ROM to the reference CFD simulation data, and they were found to offer significant improvement.

CNN-based flow field prediction for bus aerodynamics analysis

“…On the field of data-driven methods, there are some approaches for vehicle aerodynamics, but it is still an unexplored field. For example, Misar et al 9 proposed a reduced order model (ROM) based on dynamic mode decomposition (DMD) to approach the flow around the Ahmed body and Mrosek et al 10 proposed another ROM based on proper orthogonal decomposition (POD) for vehicle aerodynamics, obtaining accurate results in both cases. Other authors use different deep learning methods.…”