Application of set‐based concurrent engineering methodology to the development of cost modeling system for metal casting process

Abstract

In recent years, the reliable, accurate, and timely estimate of product cost at the conceptual design stage can enhance the competitiveness of a casting part. Set‐based concurrent engineering has emerged as an efficient solution to overcome this limitation as it provides simultaneous design procedures to positively assist the designer in achieving the required customer values in a short time and low cost. Therefore, this study attempts to integrate the set‐based concurrent engineering methodology into the development of a cost modeling system for the metal casting process. The system architecture is comprised of a user interface, knowledge database, and CAD modeling system. A detailed working flow process of the developed cost modeling system has been proposed under the guidelines of set‐based concurrent engineering. Further, the proposed methodology is demonstrated and validated by employing a real‐time casting part that was manufactured using the sand casting process. The implementation of the system provided many tangible benefits to the collaborative company including a decrease in cost estimation time (∼50%) and part rejection rate (∼32.3%). Further, the developed cost modeling approach provided a cost estimate near the actual cost of the product (∼4% deviation). It truly proves the significance of the developed system for the practitioners who believe that accurate and timely estimates of product manufacturing cost at the design stage can enhance the competitiveness of a product.

Rapid Prototyping and Tooling Technology to Assist the Development of Low-Cost Dies

“…For 3D printing of the part, Polylactic Acid (PLA) has been used in this study. It has been used because of its many benefits including glossiness, multicolor look, and simplicity of printing [6], [11]. At this stage, parametric conditions used in this study are given below in table 1.…”

A Lean Knowledge-Based Decision Support System for Cost Estimation in the Foundry Industry

“…Set-based concurrent engineering (SBCE) is an approach to developing new ideas by comparing different sets of designs instead of considering one [24]. The SBCE process helps the designers in identifying excellent solutions from the large range of alternative solutions through the elimination of weaker solutions [23,25]. The concept of SBCE can be taken as a tool for improving project management to decrease product development time and cost to ensure the quality expected by the customer [26].…”