Application of Risk Analysis by the Evaluation of Buildings Indoor Environment

Abstract

In civil engineering we face up to a wide line of risks of mostly technical character (accident hazard, formation of damages or defects). At present a continuous tightening of cladding energy parameters happens within the sphere of residential and civic engineering. With buildings built in the end of the past century it is not possible to meet completely these requirements without a considerable intervention (and not only into the cladding). Risks acting to users of such objects resulting from its use can be evaluated using the risk analysis method.

Risk Analysis - An Alternative Method in Forensic Sciences

“…SWOT analysis) and in the banking area in the insurance and in the other areas. In civil engineering there is the place of risk analysis in the point of technical and economical studies and of course not only there [8,9].…”

Quality Control and Testing of CIPP Liners

“…In the case of remediation sleeves provide the final parameters and quality to a significant extent on the construction site right only creates, and full hardened liners. Therefore it is meaningful to define the framework conditions, which ensure reliable to achieve the desired levels of quality and the customer ordered [6,7]. For this reason, the DWA (German Association for water management) developed in cooperation with the owners and operators, testing laboratories and manufacturers of CIPP regulations M 144-3 and 143-3, which is already largely worked in practice as a reliable contractual basis between the builders and the implementing firms.…”

“…This verifies to achieve their design values. Tests shall be carried out on test-pieces taken from the hardened sleeves, and a suitable place [7].…”

The Windows in the Modular Structure - Air Tightness and Quality of Installation Diagnostics

“…The air infiltrates through leaks an uncontrolled manner, depending on the strength and direction of the wind, or when a ventilation device that creates an under-pressure is running. This creates problems associated with condensation of water vapor [2], which brings increased risk of worsening of the quality of the indoor environment [3].…”