Application of ozone electrodispersion technology for disinfection of water

Abstract

This article provides definitions of the positive and negative effects of the use of chlorine and ozone in water disinfection and presents the methodology and results of experimental studies of the parameters of water treatment with ozone, the electrodispersion method, as well as the electrode system “potential plane with corona needles - grounded plane”. The parameters of water treatment modes were determined by the method of three variants of aerosol charge, negative, positive and bipolar. The parameters of water treatment with ozone determined on the basis of these studies were verified on the basis of experimental studies of the process of ozone effects on aerosol particles in the contact chamber. The methodology and analysis of the results of these studies are given. Based on these studies, the best ratios of the parameters of water flow, air velocity and electrical voltage were determined. The best disinfection result was determined by the charge polarities of the water aerosol.

Purification of surface water by using the corona discharge method

“…Authors of the research [33]- [35] investigated diverse aspects of water treatment technologies. In [33], the focus was on ozone electrodispersion technology for water disinfection, exploring the effects of chlorine and ozone, and presenting experimental studies on water treatment parameters with ozone through the electrodispersion method.…”

“…Authors of the research [33]- [35] investigated diverse aspects of water treatment technologies. In [33], the focus was on ozone electrodispersion technology for water disinfection, exploring the effects of chlorine and ozone, and presenting experimental studies on water treatment parameters with ozone through the electrodispersion method. Research [34] delved into virus elimination using high-voltage pulses, achieving 100% inactivation of bacteriophages and proposing a method for capturing viruses from air.…”