Application of laser-induced breakdown spectroscopy for the analysis of pig bones

Abstract

An application of the laser-induced breakdown spectroscopy technique (LIBS) for the elemental analysis of pig shoulder bone samples is reported. Measurements were performed using a compact laboratory-made LIBS system based on the TEA CO2 laser and time-integrated signal detection. The recorded spectra consisted of well-defined atomic and single-charged ionic lines of bone matrix elements (Ca and P) and other constituent elements (e.g., Mg, Zn, Na, K, and C) with a good signal-to-noise ratio suitable for chemical analysis. Based on the elemental composition of bone samples measured by inductively coupled plasma emission spectroscopy, limits of detection of LIBS analysis were estimated for several elements. Limits of detection ranged from 2.2 ppm (K) to 16 ppm (Zn). Carbon and H spectral lines were used for plasma diagnostics by measuring Stark widths. Optical profilometry was used to assess the capability of LIBS for depth profile analysis. For laser fluence between 13.0 and 18.2 J cm-2, the ablation rate per pulse ranged from 6 to 10 μm.