Purpose
As lubricating oils are used, their performance deteriorates and they become contaminated. The purpose of this paper is to investigate the lubrication performance of reclaimed 5 W-30 a fully synthetic used engine oil (UEO) with wear tests after refining it from a solvent-based extraction method using solvent (1-PrOH) and adsorbent materials such as cement, celite and deep eutectic solvent (DES).
Design/methodology/approach
The treated oil mixtures were prepared by blending engine oils with various adsorbent materials at 5% (w/w) in organic 1-PrOH solvent at a UEO: solvent ratio of 1:2 (w/w). The measurement of kinematic viscosity, density, the total acid number (TAN) and elemental analysis of oil samples was done by the ASTM standards D445/D446, D4052, D974 and D6595, respectively. Adsorbents and treated oil samples characterized by SEM-EDX, FTIR and UV analysis, respectively. Meanwhile, lubricating performance in tribological applications was evaluated through the wear test device using a rotating steel alloy 1.2379 cylinder and a stationary 1.2738 pin under 20, 40 and 80 kg load conditions. Worn surface analysis was done with SEM and 2.5D images.
Findings
It was found that when using the combination of cement and celite as an adsorbent in the reclamation of used engine oil demonstrated better lubricant properties. The properties of used engine oil were improved in the manner of kinematic viscosity of 32.55 from 68.49 mm2/s, VI (Viscosity index) value of 154 from 130, TAN of 3.18 from 4.35 (mgKOH/g) and Fe content of 11 from 32 mg/L. The anti-wear properties of used engine oil improved by at least 32% when 5% cement and 5% celite adsorbent materials were used together.
Research limitations/implications
The paper is based on findings from a fully synthetic 5 W-30 A5 multi-grade engine lubrication oil collected after driving approximately 12.000 km.
Practical implications
The results are significant, as they suggest practical regeneration of used engine oil is achievable. Additionally, blending fresh oil with reclaimed used engine oil in a 1:1 ratio reduced wear loss by over 10% compared to fresh oil.
Social implications
Reusing used engine oils can reduce their environmental impact and bring economic benefits.
Originality/value
This study showed that the properties of UEO can be enhanced using the solvent extraction-adsorption method. Furthermore, the study provided valuable insights into the metal concentrations in engine oil samples and their impact on lubrication performance. The order of the number of the grooves quantity and the possibility of the observed scuffing region trend relative to the samples was UEO > 5W-30 fresh oil > Treated oil sample with the adsorbent cement and celite together.
Peer review
The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-06-2024-0209/
