Anti-adherent Molds Yield Hydraulic Concrete Samples Suitable for Assessments of Surface and Water Absorption

Abstract

To assess several quality parameters of hydraulic concrete, cubic samples of this material are commonly assembled in engineering laboratories using molds. It is ubiquitous the use of cubic metallic molds of volume 125 cm3; these molds require the application of demolding substances (such as oils) on their surfaces to avoid the adhesion of the final hardened concrete sample to the molds. Despite this common practice suitable for evaluating mechanical traits of the materials, the use of a demolding agent spoils the concrete samples for the assessment of surface and water absorption parameters. To overcome this difficulty, we propose a new anti-adherent cubic mold that requires no demolding agent. The construction of the new mold based on anti-adherent polytetrafluoroethene (PTFE, Teflon®) is described with its use. To assess the claimed advantages of the new anti-adherent molds in testing surface and water diffusion traits of concrete samples, experiments on water contact angles, rates of water absorption and drying were performed on concrete specimens obtained with the classic and the new PTFE molds. It was proved the advantage of the anti-adherent mold over common metallic molds. The use of an oil as demolding agent in the concrete samples assembled in metallic molds produced conspicuous differences of water contact angles and absorption in comparison to clean concrete samples produced with PTFE molds.