Analytical calculation and analysis of air gap magnetic field for electromechanical integrated toroidal drive

Abstract

This article introduces the operating principle and structural characteristics of the electromechanical integrated toroidal drive system. For its inner and outer toroidal double-stator structure, the equivalent current method is applied to calculate its spatial magnetic field, which is produced by the sector cylindrical magnetic teeth and the helical variable cross-section magnetic beam. For the application of the equivalent current method in the modeling of the magnetic field, an effective correction method is proposed. The flux density calculation models for the main magnetic field in the inner and outer air gaps are established under the unified coordinate system, and the analytical expression of magnetic field distribution in spatial air gap is deduced. Finally, the feasibility of the mathematical analytical model is verified by comparing the analytical calculation results with the finite element simulation results. The influences of the main structural parameters on the distribution of the air gap magnetic field and the torque are analyzed, which lay a theoretical foundation for the optimal design of the electromechanical integrated toroidal drive system.

Fast Magnetic Field Approximation Method for Simulation of Coaxial Magnetic Gears Using AI

“…+ 𝐸𝐸 𝑥𝑥,𝑧𝑧 �log �1 − 𝐷𝐷�𝑥𝑥, 𝐺𝐺(𝑥𝑥, 𝑧𝑧)��� (10) 𝐿𝐿 𝐿𝐿1 (𝐺𝐺) = 𝐸𝐸 𝑥𝑥,𝑦𝑦,𝑧𝑧 (||y − 𝐺𝐺(𝑥𝑥, 𝑧𝑧)||) (11) where G tries to minimize this objective against an adversarial D that tries to maximize it. For the Pix2Pix model, the generator not only fools the discriminator but also is near the ground-truth output in an L2 sense.…”

“…Therefore, CMGs have been employed in critical environments to meet the high requirement and harsh working conditions. For example, high-efficiency and high-performance magnetic gears have been used in electric vehicles (EVs) [5], electricity propelled ships [6], [7], and electric aircraft [8]- [10].…”

Torque Modeling and Verification of Permanent Magnet Toroidal Motor with Air Gap Deformation

“…In Refs. [17–20], on account of torque model of toroidal drive system, the electromagnetic parameters adopt fixed and effective value for simple calculation, which cannot analyze the time‐varying characteristics of torque accurately. The results of electromagnetic torque are references and limitations merely.…”

Study on the Harmonic Loss of Permanent Magnet Toroidal Space Motor for Hybrid Electric Vehicles

“…The motor has two mechanical ports that connect with engine and axle of driving wheel respectively, and an electrical port In terms of power transmission, the toroidal motor adopts magnetic gear meshing transmission [20], which avoids the problems of mechanical transmission effectively. Compared with other dual-rotor motors, the shaft of planet is perpendicular to the output shaft of planet carrier rotor in space [21], thus heat dissipation performance of toroidal motor is improved. Meanwhile, the winding of toroidal stator and permanent magnet teeth of worm inner stator are spiral structure, which make the permanent magnet teeth of planet mesh with multiple windings and permanent magnet teeth at the same time.…”