Analysis of vertical vibrations affecting a child transported in a child seat during a car passing over the release speed bump

Abstract

The article presents the results of research on the assessment of vibrational comfort of children carried in child seats. The work analyzes the impact of the child's mass and the speed of the car passing through the speed bump on the level of vibration to which the passenger (child) transported in the child seat mounted on the rear seat of the car is exposed. The tested car seats were installed in a passenger car using the ISOfix base. During the tests, the measured values were the acceleration of the seat child seat, the backrest of the child seat, the rear seat of the car and the child seat ISOfix base. As part of the research, car drive through the speed bump were carried out at different car speeds and with different mass simulating the mass of a child. The test results were analyzed in order to determine the magnitude of vibrations generated during car drive through the speed bump. Based on the results obtained, the level of vibrational comfort of a child trip in a child seat was assessed.

Analysing the Vibration of Bicycles on Various Road Surfaces in the City of Zilina

“…Measuring the comfort with technology and techniques can provide information about how the surrounding environment affects the means of transport -in this case, the bicycle. Vibration is not a desirable feature for either cyclists or car users [20]; therefore, vibration is perceived mostly as discomfort during the ride. Therefore, probably most cyclists intend to minimise this discomfort as much as possible.…”

Design and simulation of structural durability of passenger car front in collision

“…Liu analyzes the frontal collision on the bus chassis [6]. Some authors have studied, calculated, and simulated the structural strength of the passenger car's front and energy absorption in the collision [7][8][9][10][11][12][13][14][15][16][17][18][19][20][21][22][23][24]. In this study, Design a force absorption system at the front of the vehicle to ensure a safe space and the driver is not compromised.…”

Researching the force absorption system for the front of the passenger car to secure the driver

“…The author Frej has studied the comfort of people sitting in the back seat of a car. This study is comfortable when the car goes through speed bumps, But not reliable enough because has omits the safety and comfort of the driver and has not been simulated with a collision [5]. Author Lotta Jakobsson studies the balance of the 2 vehicle and the protection of adults and children in the car.…”