Analysis of the temperature component of the combined standard uncertainty of the refractive index according to the test data of the control system for meteorological parameters developed for the Lyptsi geodetic polygon

Abstract

The National Scientific Centre “Institute of Metrology” is actively involved in the implementation of a number of international projects under the EMPIR programme. One of such joint projects is the EMPIR 18SIB01 GeoMetre research project “Large-scale dimensional measurements for geodesy”. The overall goal of the project is to ensure traceability of length measurements – from the measurement standard of the unit of length to long distances typical for geodetic measurements. As a result of the project, it is necessary to provide length measurements of at least 5 km with an expanded uncertainty of no more than 1 mm.
 The main task of the NSC “Institute of Metrology” within this project is the development, research and practical implementation of methods and means of accounting for the influence of the earth’s atmosphere on the results of measurements of long distances in geodesy, carried out using electromagnetic waves in the optical range.
 When performing the section Task 1.4 of the project, new methods of highly accurate determination of the mean integral refractive index of air, used as a correction taking into account the influence of the atmosphere on the measurement results, are justified. Requirements for the accuracy of measurements of meteorological parameters at discrete points of the baseline are formulated, which are necessary to determine the mean integral refractive index. That is, the requirements for the metrological characteristics of temperature, pressure and humidity sensors are determined.
 The article discusses the results of the development, manufacture and testing of the sensors for temperature measurement. It is shown that the created sensors meet the requirements of the GeoMetre project.