Analysis of the impact of damage to the injection system on the emission of toxic substances in a spark-ignition internal combustion engine

Dziubiński, Mieczysław; Siemionek, Ewa; Drozd, Artur; Żur, Paweł; Ścirka, Michał; Tatarynow, Dawid

doi:10.19206/ce-2019-418

Cited by 1 publication

(1 citation statement)

References 2 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…In addition, modern fuel injection systems (Common Rail) are used, which operate on the basis of appropriate precisely-selected control strategies stored in the ECU (Engine Control Unit). The use of alternative fuels in diesel engines, based on vegetable oils (rapeseed oil, soybean oil and others), due to significant differences in physicochemical properties (in particular, viscosity) relative to ON, is difficult [32][33][34][35][36][37][38][39][40][41][42][43]. Therefore, to counteract these problems, attempts have been made to modify the engine itself (Ellsbett technology) as well as its accessories (fuel heating systems, dual-fuel systems) [44].…”

Section: Introductionmentioning

confidence: 99%

Test Stand for a Motor Vehicle Powered by Different Fuels

et al. 2022

Self Cite

View full text Add to dashboard Cite

This article discusses current testing methods for motor vehicle engines. Traction engines have so far been tested, for example, according to WLTP (Worldwide Harmonized Light Vehicle Test Procedure) driving tests, but due to the “VW—gate” incident, these are now to be supplemented by RDE (Real Driving Emissions) tests, conducted under real road conditions. The analyses of the state of knowledge and the directions of research to date unequivocally indicate the need for the construction of a stand that allows: testing of a complete vehicle admitted to traffic; testing of a motor vehicle with the possibility of simulating real operating conditions; load setting with the possibility of its regulation; feeding the engine with various fuels; modification of the software of controllers having a direct impact on the control strategies of the engine; transmission and traction control system; reading, recording and analysis of the parameters of the operation of control systems in real time; detailed recording and analysis of the combustion process occurring directly in the combustion chamber; and the measurement of emitted toxic substances. On a bench with the above features, tests were carried out on a diesel motor vehicle, which were based on recording changes in the parameters of the combustion and injection process. The tests were conducted under static and dynamic conditions. Tests under static conditions were conducted on a chassis dynamometer. They consisted of indicating the engine for different fuel dose control maps. The vehicle equipped with the test engine was driven at a constant speed on the chassis dynamometer and loaded with a drag force of 130 Nm. Tests under dynamic conditions were conducted under real traffic conditions. They were limited to the presentation of results under static conditions. The main results of the tests are given in the conclusion and include a general summary. In particular, the presented results of the diesel tests demonstrate an attempt to adapt the engine to co-power with hydrogen.

show abstract