Analysis of the Energy Flow in a Municipal Wastewater Treatment Plant Based on a Supercritical Water Oxidation Reactor Coupled to a Gas Turbine

Abstract

Biological municipal wastewater treatments lead to high sludge generation and long retention times, and the possibilities for recovery of the energy content of the input waste stream are very limited due to the low operating temperature. As an alternative, we propose a sequence of exclusively physicochemical, non-biological stages that avoid sludge production, while producing high-grade energy outflows favoring recovery, all in shorter times. Ultrafiltration and evaporation units provide a front-end concentration block, while a supercritical water oxidation reactor serves as the main treatment unit. A new approach for energy recovery from the effluent of the reactor is proposed, based on its injection in a gas turbine, which presents advantages over simpler direct utilization methods from operational and efficiency points of view. A process layout and a numerical simulation to assess this proposal have been developed. Results show that the model process, characterized with proven operating parameters, found a range of feasible solutions to the treatment problem with similar energy costs, at a fast speed, without sludge production, while co-generating the municipality’s average electricity consumption.

Low-Energy-Consumption Wastewater Evaporation Using Single-Electrode High-Voltage Electric Field Enhancement

“…At present, there are many kinds of common wastewater treatment processes, as shown in Table 1. Among them, wastewater evaporation treatment technology is one of the most common wastewater treatment methods [2][3][4]. Compared with other wastewater treatment technologies, wastewater evaporation can improve the stability of the system, but high energy consumption is the key to limiting the development of wastewater evaporation technology.…”