Analysis of Solar and Windmill Using Real Time Simulation Tool

Abstract

This work is concerned with modelling and modification of a wind power production method into a solar-wind composite mode along with analysis and simulation of the proposed method. The suggested Wind turbine is modelled, and parameters such as rotor diameter, wind speed, pitch angle, etc are taken into count. The PV module is then modeled based on general parameters such as solar irradiation and temperature, etc. A PVsyst simulation is performed for the solar PV grid and stand alone system. Further homer grid software is used to perform simulation on the hybrid system and the results were observed. The hybrid system has an output 1.5kw or 1500w which consists of wind turbines (500kw) and PV solar system of 6 panels of 165w each producing the total peak output of 1kw or 1000w. Autocontollers and converters are used along with a battery of 155w for storage. Conclusions point that the load absorbs power from both solar and wind schemes. However, there is the fluctuation of power supply in some driving conditions, such as modification of solar radiation and wind velocity