Analysis of residential building with STAAD. Pro &amp; ETABS

Kumar, Krishna; Lingeshwaran, N.; Jeelani, Syed Hamim

doi:10.1016/j.matpr.2020.08.329

Cited by 9 publications

(3 citation statements)

References 1 publication

Supporting

Mentioning

Contrasting

Order By: Relevance

“…Overall, the review emphasizes the potential of LCA and BIM to promote sustainability in the construction industry and support the design of energy-efficient buildings. [4] Xining This study examines the combination of BIM and LCA tools to improve data flow and interoperability for low carbon building design. The study finds that the operation phase contributes the most to GHG emissions, while concrete is the most used material but contributes less to emissions than steel and aluminum.…”

Section: Literature Reviewmentioning

confidence: 99%

Revolutionizing Single-Storey Residential Building Design and Construction with BIM Technology

Kumar¹,

kumar²,

Mouli³

et al. 2023

Int. J. Res. Publ. Rev.

View full text Add to dashboard Cite

This study focuses on the sustainable design of a single storey dwelling unit, considering the environmental impact caused by the construction industry. The study includes planning, interior and exterior design using Revit software, design of structural elements in Robot structural analysis, and structural analysis using Staad pro and Robot structural analysis. Additionally, the study evaluates the environmental impact of the building throughout its lifetime using LCA by One Click LCA. The aim of this study is to design a project that incorporates all the necessary structural properties of traditional construction, while promoting sustainability and minimizing environmental impact. Through this study, we hope to contribute to the development of sustainable construction practices and inspire other designers and builders to adopt environmentally conscious design principles.

show abstract

Section: Literature Reviewmentioning

confidence: 99%

Revolutionizing Single-Storey Residential Building Design and Construction with BIM Technology

Kumar¹,

kumar²,

Mouli³

et al. 2023

Int. J. Res. Publ. Rev.

View full text Add to dashboard Cite

show abstract

“…As a design engineer wants to be safe in his structure, this wind effect will cause and produce wind induce movement in the structure. As high-rise buildings move onward the envelope to larger heights, the structural designers are not only faced with difficulty in choosing a structural element to take the lateral load such as wind load and earthquake load but also ensure the design criteria that meets reliability and serviceability requirement under difficult wind environment [14][15][16]. Wind load is a lateral weight on buildings that act along and across the wind.…”

Section: Introductionmentioning

confidence: 99%

Study The Effects Of Various Wind Loadings In High Rise Rc-Framed Structures In Zone –V

Yadav¹,

Choudhary²

2023

J Civ Eng Res Technol

View full text Add to dashboard Cite

The construction of high-rise buildings, both residential and commercial, is increasing. Every structural designer must be aware of the forces such as earthquake and wind effects. Every engineer is challenged to provide stability and strength for loads such as lateral forces (wind and seismic loading). That is why wind loading has become one of the most important issues in high-rise buildings. Lateral loads are crucial for drift; therefore, drift must be considered for high-rise structures. This research work focuses on the effects of various wind loads on high-rise structures with the provision suggested in IS 875(part 3):2015 and for seismic load using IS code 1893(part1):2016. For the study, four irregular plan building is used with G+20 story in seismic zone V and terrain category II with a basic wind speed of 44, 47, 50, and 55 m/s that is analyzed and designed using the structural analysis software tool STAAD Pro. The bending moment, shear forces, story displacements, story shear, and story drift are analyzed on every level of height on the building, and the results are compared with them.

show abstract

“…Analysis of the G+4 multi-storey residential building was done using STAAD.Pro, the limit state method of philosophy was adopted for the computations of shear force, bending moment, and deflections of structural members [1]. Also, a multi-storey building was analyzed using different load combinations by commercial software and then designed using IS code of practice [2]. The storey height of the G+7 framed structure was analyzed using STAAD.Pro and costs were compared between the type of composite materials used and based on their load combinations [3].…”

Section: Introductionmentioning

confidence: 99%

Structural Optimization of RC Columns in a Multi-storeyed Building by Tree-Columns Subjected to Lateral Loads

Balaji¹,

Vivek²,

Fernando³

et al. 2023

E3S Web of Conf.

View full text Add to dashboard Cite

It has become the agenda to use the bottom storey as the parking area in the multi-storey buildings and it has been quite a disturbance caused by RCC columns occupying more while projecting down to the ground. To get rid of this disturbance and for the aesthetic appearance, the number of columns in the bottom storey has to be reduced so that number of the footing will also get reduced. To achieve this, the five-storey RCC framed structure of plan area 30m X 33m which is assumed to be situated in Chennai with each storey height of 4m is modelled in STAAD Pro software in the way that the loads from the four columns present in the ends of each room will be transferring to the single-column placed in the centre of each room at the bottom storey. Then the necessary loads such as Gravity loads, Seismic loads, Wind loads, and software-generated automatic load combinations were applied to the generated model and the analysis was carried out. Similarly, the conventional model of the same plan was also analyzed by STAAD Pro software with the same set of load cases, and a comparative study of structural parameters such as bending moment, shear force, and deflection was done. Finally, both the models were designed as per IS code and Cost analysis between the two models was carried out.

show abstract

Analysis of residential building with STAAD. Pro & ETABS

Cited by 9 publications

References 1 publication

Revolutionizing Single-Storey Residential Building Design and Construction with BIM Technology

Revolutionizing Single-Storey Residential Building Design and Construction with BIM Technology

Study The Effects Of Various Wind Loadings In High Rise Rc-Framed Structures In Zone –V

Structural Optimization of RC Columns in a Multi-storeyed Building by Tree-Columns Subjected to Lateral Loads

Contact Info

Product

Resources

About