Analisis Total Productive Maintenance Dengan Metode Oee Dan Fmea Pada Mesin Extruder Gw-350

Abstract

An industrial company that specializes in plastics, with the basic ingredients of PolyEthylene Terephthalate, PolyPropylene, and Hight Impact Polystyrene, the product is a plastic plate that is produced through the operation of the Extruder machine. Total Productive Maintenance (TPM) is one method of analyzing a machine and will help research the effectiveness of a machine with the help of other methods such as Overall Equipment Effectiveness (OEE) and Failure Mode and Effect Analysis (FMEA). Based on the quantitative analysis of the OEE calculation, the OEE value of the Extruder 1 GW-350 machine is obtained with an average calculation of 79.35%. Based on qualitative analysis using FMEA, the RPN failure mode score on the Extruder 1 GW-350 engine was obtained. The highest RPN value is the printer is unstable (die) at 240.

Penerapan Metode Overall Equipment Effectiveness Dalam Pengukuran Efektivitas Mesin Press Kennedy Ken-503-9470k di PT. ABC

“…f. Hasil analisis Overall Equipment Effectiveness (OEE) OEE adalah suatu metode perhitungan yang berguna untuk mengevaluasi efektivitas peralatan atau mesin yang tersedia. OEE juga merupakan salah satu komponen yang tercakup dalam Total Productive Maintenance, dan dapat berfungsi sebagai indikator kinerja mesin atau sistem kerja pada perusahaan [19]. Diagram fishbone merupakan salah satu alat yang berguna untuk mengidentifikasi dan memahami hubungan antara sebab akibat dalam rangka menemukan inti penyebab suatu masalah.…”