Analisis Oil Losses Pada Proses Pengolahan Minyak Inti Kelapa Sawit Di Pt. Xyz Dengan Metode Seven Tools

Abstract

One form of efficiency that can be done by palm oil mill companies so that production targets are achieved is to reduce the number of oil losses or loss of oil in the process of making their products, in this case, are CPO and PKO. This is because the lower the amount of oil losses, the higher the CPO and PKO that will be produced. This study aims to analyze oil losses in the processing of Palm Kernel Oil or PKO with the seven tools method. Data collection techniques in this study used case studies based on literature studies and field studies. Data were analyzed descriptively qualitatively. The conclusion of this research is the analysis of oil losses in the process of making palm kernel oil using check sheets and histograms, the data obtained shows high oil losses in the company PT. XYZ with an average of 8.92% for 4 months, so it is necessary to make improvements that at improving the quality of good palm kernel oil (PKO). Analysis of PKO oil losses at PT. XYZ is also performed using a cause-and-effect diagram. This aims to identify the causes of oil loss which include raw materials, human resources (HR), machinery, and the environment in order to fulfill the oil loss standard designed by the company, which is less than 8.00%, and also prevent high oil losses. which may happen again in the future.

Determination of Content and Oil Losses in Meal through Palm Kernel Pressing Process at PT XYZ Belawan

“…Many factors were thought to have contributed to this case, such as minor damage to the pressing unit and the high oil levels in the Palm Kernel Expeller. However, if referred to several studies, it was found that the percentage of oil loss in the pressing unit was < 8% [19,27]. Hence, based on this standard, the percentage of oil loss remained within the normal limits.…”

“…The investigation of oil loss in CPKO processing at PT XYZ was carried out using the seven tools method, which focuses on case studies (library studies) and direct field studies. The results of the qualitative descriptive study concluded that the company suffered losses due to high oil losses for four months of 8.92% [19]. In addition to CPKO, oil loss is also occurred in CPO, which was analyzed using statistical process control methods at PT Bastian Olah Sawit Tungkal Palembang.…”

Analisa Keselamatan dan Kesehatan Kerja pada Proses Pemuatan Crude Oil di Single Buoy Mooring Tuban Marine Terminal

“…Metode deskriptif kualitatif dengan memaparkan dan menganalisa data hasil temuan yang didapat di lapangan, menganalisa data berupa temuan yang mudah dipelajari, diteliti, sistematis, logis, dan menemukan penyebab timbulnya masalah (Ulimaz et al, 2021).…”

Analisis Keselamatan dan Kesehatan Kerja pada Stasiun Loading Ramp dengan Metode HIRARC di PT. XYZ

“…Proses produksi dikatakan baik apabila proses tersebut menghasilkan produk yang memenuhi standar yang telah ditetapkan (Adianti, 2019). Pengolahan atau produksi minyak kelapa sawit yang baik merupakan salah satu faktor yang menentukan keberhasilan usaha perkebunan kelapa sawit (Ulimaz, 2021).…”