Analisis dan Perancangan Simulasi Perbandingan Kinerja Jaringan Komputer Menggunakan Metode Protokol Routing Statis, Open Shortest Path First (OSPF) dan Border Gateway Protocol (BGP) (Studi Kasus Tanri Abeng University)

Abstract

Network is a communication between two devices to communicate with each other either using wire or wireless media. The LAN network topology used at Tanri Abeng Unversity still uses a static routing topology, where the routing process is still done manually, so that if there is an addition of a new network, it will be difficult to configure the routing table. In this research, a network topology with dynamic routing methods will be built that will help improve network performance at Tanri Abeng University. The purpose of this research is to analyze the comparison of network performance at Tanri Abeng Unversity in sending data packets using static routing protocols, OSPF, and BGP based on the parameters used. In this research also, the ping process was carried out using the cisco packet tracer 100 times with the size of the data packet sent of 32 bytes for each routing method to be compared. Then in this research, the test scenario was carried out eight times on each parameter of throughput, packet loss, delay, and jitter in the hope of determining which routing method is more optimal among static routing, OSPF, and BGP at Tanri Abeng University. The test results show that BGP routing for throughput and packet loss parameters is superior to other routing methods, while OSPF routing for delay and jitter parameters is superior to other routing methods.

Analisis performansi routing protocol RIPv2 dan EIGRP menggunakan FRRouting

“…Masalah ini dapat diatasi dengan mengatur lalu lintas jalur dalam jaringan komputer, yang sering disebut juga dengan routing protocol. Routing protocol berfungsi untuk mengatur lalu lintas dalam jaringan komputer dan menjalankan data dalam jaringan komputer [2].…”

“…Jitter merupakan fluktuasi yang terjadi dalam ukuran antrian, waktu pemrosesan data, serta pengumpulan ulang paket data di ujung perjalanan. Jitter seringkali dikenal sebagai variasi delay yang terkait dengan latensi karena mengindikasikan perubahan delay yang signifikan selama transmisi data dalam jaringan [2]. Jitter tidak terdapat di protokol TCP.…”

Analisis Perbandingan Performas IP-PBX (Internet Protocol Private Branch Exchange) Berbasis Cloud dan Physical Server Menggunakan Protocol SIP (Session Initation Protocol) Studi Kasus PT. Link Net, Tbk

“…QoS merupakan singkatan dari (Quality of Service) yang dalam konteks komunikasi dan jaringan merujuk pada kemampuan suatu jaringan atau sistem untuk memberikan kualitas yang diinginkan atau dijamin dalam pengiriman data, suara, atau layanan lainnya [11]. QoS bertujuan untuk mengelola dan mengoptimalkan penggunaan sumber daya jaringan agar memenuhi kebutuhan yang berbeda dari aplikasi dan layanan yang berjalan di atasnya.…”

“…1. Throughput Throughput merupakan parameter yang digunakan untuk mengetahui kualitas suatu jaringan pada aktivitas download yang sedang berjalan [11]. Berikut tabel parameter dan cara menghitung Throughput.…”

Analysis and Design of Cisco Packet Tracer Interconnections Between Autonomous Systems (AS) Using the Border Gateway Protocol at Campus 3 Khairun University

“…So that later it can be applied to the actual network, In research [3] discussing the Analysis and Simulation of Routing Border Gateway Protocol (BGP) Between Autonomous Systems Using Free Range Routing (FRR) With the aim of testing Quality of Service (QoS) performance on topology 1 and 2 using scenarios without failover (main route) and failover (backup route). The QoS parameters tested are throughput, delay, jitter, and packet loss, and the research [4] discusses the Analysis and Design of Computer Network Performance Comparison Simulations Using Static Routing Protocol Methods, Open Shortest Path First (OSPF) and Border Gateway Protocol (BGP) (Case Study Tanri Abeng University) with the aim of comparing the performance of computer networks in sending data packets using static routing protocols, OSPF, and BGP based on the parameters used.…”