An underwater robot with self-adaption mechanism for cleaning steel pipes with variable diameters

Abstract

Purpose This paper aims to present an underwater climbing robot for wiping off marine life from steel pipes (e.g. jackets of oil platforms). The self-adaption mechanism that consists of a passive roll joint and combined magnet adhesion units provides the robot with better mobility and stability. Design/methodology/approach Adhesion requirements are achieved by analyses of falling and slipping. The movement status on pipes is analyzed to design the passive roll joint. The optimized structure parameters of the combined magnet adhesion unit are achieved by simulations. An approximation method is established to simplify the simulations conditions, and the simulations are conducted in two steps to save time effectively. Findings The self-adaption mechanism has expected performance that the robot can travel on pipes in different directions with high mobility. Meanwhile, the robot can clean continuous region of underwater pipes’ surface of offshore platforms. Practical implications The proposed underwater robot is needed by offshore oil platforms as their jackets require to be cleaned periodically. Compared with traditional maintenance by divers, it is more efficient, economic and safety. Originality/value Due to the specific self-adaption mechanism, the robot has good mobility and stability in any directions on pipes with different diameters. The good performance of striping attachments from pipes makes the underwater robot be a novel solution to clean steel pipes.

Motion analysis of screw drive in-pipe cleaning robot

“…The contact point is assumed to be m f i in the coordinate system {O m } (m = 0, 1, 2). And it is represented by the point 2 f i in the {O 2 } dynamic coordinate system as in formula (3), according to the conversion formula between coordinate systems, 0 f i can be obtained, as in formula (5)…”

“…The accumulation of microorganisms in the seawater can easily lead to biological blockage of the pipelines, so that the pipelines are needed to be cleaned regularly. [1][2][3] At present, most of the cleaning methods are by dragging the cleaning equipment with the unpowered cables in the pipeline cleaning process. This cleaning method cannot dynamically adjust the cleaning according to the internal conditions of the pipeline.…”

Study on the Optimal Design for Cavitation Reduction in the Vortex Suction Cup for Underwater Climbing Robot

“…During the research of underwater climbing robots, choosing which kind of suction method is one of the main points that researchers should consider [9,10]. There are various types of adhesion methods that include magnetic adhesion [11], vacuum suction, vortex suction, Bernoulli suction [12], adhesion using gripping equipment [13], propulsion adhesion [14], biomimetic adhesion [15], and so on.…”

Analysis and experimental research on motion stability of wall-climbing robot with double propellers

“…The research on wall-climbing robots has become crucial in the field of robotics. 1 This is due to the fact that more people are interested in wall-climbing robots in several civil and industrial application domains, [2][3][4][5] such as bridge inspection, inspection and maintenance of large oil storage barrels in petrochemical industry, welding, sandblasting for rust removal, painting and anticorrosion treatment on ship hull, spray painting and anticorrosion treatment, and cleaning of glass outer walls of high-rise buildings, etc.…”