Abstract:Metal sulfides are gaining prominence as conversion anode materials for lithium/sodium ion batteries due to their higher specific capacities but suffers from low stability and reversibility issues.
“…74,75 However, there is difference for the second discharge curves of the sample M900 and sample M800 and M700 due to considerable loss in specic capacity of the M900 sample. 76 This result agreed well with the capacity value of M900 sample which is lower that M800 and M700.…”
Octahedron morphology of CoFe2O4 is obtained with particle size in the range of 1.0–1.5 μm. CoFe2O4 exhibits a high discharge capacity of 839 mA h g−1 in the first cycle at a current density of 0.1 A g−1 and good rate capability.
“…74,75 However, there is difference for the second discharge curves of the sample M900 and sample M800 and M700 due to considerable loss in specic capacity of the M900 sample. 76 This result agreed well with the capacity value of M900 sample which is lower that M800 and M700.…”
Octahedron morphology of CoFe2O4 is obtained with particle size in the range of 1.0–1.5 μm. CoFe2O4 exhibits a high discharge capacity of 839 mA h g−1 in the first cycle at a current density of 0.1 A g−1 and good rate capability.
“…It is well-known that the high specific capacity results from the diffusion contribution, whereas the excellent rate capability is attributed to its surface contribution. 29 Thereafter, the contributions of diffusion controlled and surface-controlled mechanisms were calculated using the following eqn (vi) and (vii): 30 i ( V ) = k 1 v + k 2 v 1/2 i ( V )/ v 1/2 = k 1 v 1/2 + k 2 where i ( V ) is the current at constant potential. k 1 v and k 2 v 1/2 represent the contributions of surface-controlled and diffusion-controlled processes, respectively.…”
Section: Resultsmentioning
confidence: 99%
“…It is well-known that the high specific capacity results from the diffusion contribution, whereas the excellent rate capability is attributed to its surface contribution. 29 Thereafter, the contributions of diffusion controlled and surface-controlled mechanisms were calculated using the following eqn (vi) and (vii): 30…”
Herein, a mesoporous MnCo2O4/Co3O4 nanocomposite was fabricated using polyvinylpyrrolidone (PVP)‒assisted hydrothermal synthesis method by maintaining only the non-stoichiometric ratio of Mn and Co (2:6), leading to an extra phase of...
“…Instead, they give rise to a new phase of Cu 1+x S (0 < x # 1) due to the reaction between CuS and additional Cu dissolved from the Cu current collector. 18,34 This newly formed Cu 1+x S phase can produce other stable phases in the subsequent sodiation processes. Therefore, relying on the intermediate phases formed during the initial sodiation process (i.e., irreversible phase transition) is inadequate to explain the superior rate performance of the CuS anode.…”
Section: Phase Transition Sequence In the Na-cus Half-cellmentioning
The CuS anode enables spontaneous transformation into a porous nanostructure and the formation of conductive Cu nanoparticles. These features of the CuS conversion anode for Na-ion batteries exhibit remarkable electrochemical performance.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.