An Equivalent Emission Minimization Strategy for Causal Optimal Control of Diesel Engines

Abstract

One of the main challenges during the development of operating strategies for modern diesel engines is the reduction of the CO 2 emissions, while complying with ever more stringent limits for the pollutant emissions. The inherent trade-off between the emissions of CO 2 and pollutants renders a simultaneous reduction difficult. Therefore, an optimal operating strategy is sought that yields minimal CO 2 emissions, while holding the cumulative pollutant emissions at the allowed level. Such an operating strategy can be obtained offline by solving a constrained optimal control problem. However, the final-value constraint on the cumulated pollutant emissions prevents this approach from being adopted for causal control. This paper proposes a framework for causal optimal control of diesel engines. The optimization problem can be solved online when the constrained minimization of the CO 2 emissions is reformulated as an unconstrained minimization of the CO 2 emissions and the weighted pollutant emissions (i.e., equivalent emissions). However, the weighting factors are not known a priori. A method for the online calculation of these weighting factors is proposed. It is based on the Hamilton-Jacobi-Bellman (HJB) equation and a physically motivated approximation of the optimal cost-to-go. A case study shows that the causal control strategy defined by the online calculation of the equivalence factor and the minimization of the equivalent emissions is only slightly inferior to the non-causal offline optimization, while being applicable to online control.Energies 2014, 7 1231

Optimal Integrated Emission Management through Variable Engine Calibration

“…Recently, this method was adapted to account for engine-out emissions. In [7], a conventional powertrain equipped with a diesel engine whose start of injection can be optimized during operation was considered. ECMS was applied to the optimal emission management problem by introducing an equivalent cost factor that translates engine-out NO x emissions to an equivalent fuel cost.…”

Adaptive calibration of Diesel engine injection for minimising fuel consumption with constrained NOx emissions in actual driving missions

“…Other methods, like Equivalent Consumption Minimisation Strategy (ECMS) and Model Predictive Control (MPC) as in Petri et al 18 and Nishio and Shen 19 seem to be more promising in solving the issues of real-time control of Diesel engine. Zentner et al 20 propose an ECMS method to provide a solution for online optimal control of Diesel engine with constraint in N O x emission. The authors assume a constant emission reference target resulting in unrealistic emission during real driving conditions.…”

Zero-dimensional modelling of a four-cylinder turbocharged diesel engine with variable compression ratio and its effects on emissions

“…Although new technologies like the control methods, exhaust gas recirculation (EGR), and variable valve timing (VVT), have helped to reduce the NOx and soot emissions considerably [1][2][3][4][5][6][7][8], further measures are to be taken to meet the increasingly restrictive emission standards. It is of no contradiction that diesel engines are in the top list to face emission limitations in near future and the trade-offs between NOx-CO 2 -Soot emissions must be handled without compromising on the performance outputs [9,10].…”