An electrophoretic coating using a nanosilica modified polyacrylate resin

Chu, Hsin‐Sen; Chang, Ching‐Yuan; Shen, Bei-Huw

doi:10.1007/s10965-018-1440-7

Cited by 2 publications

(3 citation statements)

References 16 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…Preparation of the AR primer. Painting was performed by incorporating 0.67 g TMSPMA-SiO 2 , relative to the total paint content, into 20 mL of amino resin, stirring thoroughly [42][43][44]. Subsequently, we added 0.335 g PVP-Cu 2 O and stirred the mixture again [5,35,45].…”

Section: Preparation Of Ar Primermentioning

confidence: 99%

See 1 more Smart Citation

Innovative Acrylic Resin-Hydrogel Double-Layer Coating: Achieving Dual-Anchoring, Enhanced Adhesion, and Superior Anti-Biofouling Properties for Marine Applications

Jiang,

Zhang,

Wang

et al. 2024

Gels

View full text Add to dashboard Cite

Traditional anti-corrosion and anti-fouling coatings struggle against the harsh marine environment. Our study tackled this by introducing a novel dual-layer hydrogel (A-H DL) coating system. This system combined a Cu2O–SiO2–acrylic resin primer for anchoring and controlled copper ion release with a dissipative double-network double-anchored hydrogel (DNDAH) boasting superior mechanical strength and anti-biofouling performance. An acrylamide monomer was copolymerized and cross-linked with a coupling agent to form the first irreversible network and first anchoring, providing the DNDAH coating with mechanical strength and structural stability. Alginate gel microspheres (AGMs) grafted with the same coupling agent formed the second reversible network and second anchoring, while coordinating with Cu2+ released from the primer to form a system buffering Cu2+ release, enabling long-term antibacterial protection and self-healing capabilities. FTIR, SEM, TEM, and elemental analyses confirmed the composition, morphology, and copper distribution within the A-H DL coating. A marine simulation experiment demonstrated exceptional stability and anti-fouling efficacy. This unique combination of features makes A-H DL a promising solution for diverse marine applications, from ship hulls to aquaculture equipment.

show abstract

Section: Preparation Of Ar Primermentioning

confidence: 99%

“…We added 1 mL of defoamer, 2 mL of co-solvent (xylene), and 1 mL of catalyst. We mixed 1 mL of leveling agent and 2 mL of dispersant for an additional 15 min to achieve the final primer [35,42,46,47].…”

Section: Preparation Of Ar Primermentioning

confidence: 99%

Innovative Acrylic Resin-Hydrogel Double-Layer Coating: Achieving Dual-Anchoring, Enhanced Adhesion, and Superior Anti-Biofouling Properties for Marine Applications

Jiang,

Zhang,

Wang

et al. 2024

Gels

View full text Add to dashboard Cite

show abstract

“…Accordingly, many researchers have investigated the basic properties of the resin particles and the impact of paint in different environments [24,25,26,27,28,29]. However, the influence of the coating amount on the resulting surface performance of the coating has been less investigated, let alone for fast water-based UV curing PUA wood coatings.…”

Section: Introductionmentioning

confidence: 99%

Preparation of a Fast Water-Based UV Cured Polyurethane-Acrylate Wood Coating and the Effect of Coating Amount on the Surface Properties of Oak (Quercus alba L.)

Wang

Liu

et al. 2019

Polymers

View full text Add to dashboard Cite

A fast water-based ultraviolet light (UV) curing polyurethane-acrylate (PUA) wood coating was prepared in the laboratory, and applied on oak (Quercus alba L.) at different coating amounts. The PUA wood coating can be fast cured within 22 min, which highly improved the drying speed compared to normal water-based wood coatings (often higher than 35 min). The coating amounts affected the coating properties after curing on oak. With the increase of coating amount, the adhesion, hardness and gloss value of surface increased to different extents. Meanwhile, the surface of sample became smooth gradually because the voids of the oak were filled. Thus, higher coating amount resulted in better coating properties. However, no significant increase of penetration depth was found. During curing, the hydroxyl groups of the wood reacted with the coating. The optimal parameter in this study was the coating amount of 120 g/m2, where the adhesion reached 1 (with 0–5% cross-cut area of flaking along the edges), with the hardness of 2H and the gloss of 92.56°, which met the requirement of Chinese standard GB/T 18103–2013, and could be used for engineered wood flooring.

show abstract

An electrophoretic coating using a nanosilica modified polyacrylate resin

Cited by 2 publications

References 16 publications

Innovative Acrylic Resin-Hydrogel Double-Layer Coating: Achieving Dual-Anchoring, Enhanced Adhesion, and Superior Anti-Biofouling Properties for Marine Applications

Innovative Acrylic Resin-Hydrogel Double-Layer Coating: Achieving Dual-Anchoring, Enhanced Adhesion, and Superior Anti-Biofouling Properties for Marine Applications

Preparation of a Fast Water-Based UV Cured Polyurethane-Acrylate Wood Coating and the Effect of Coating Amount on the Surface Properties of Oak (Quercus alba L.)

Contact Info

Product

Resources

About