An efficient and facile method to develop defect-free OLED displays

Abstract

Organic light emitting diodes (OLEDs) have captured the attention of the flat-panel display market owing to their high luminescence and versatile properties. However, substrate processing plays a critical part in the fabrication of OLED displays, demonstrated here as a passive matrix display, where plenty of defects, which appear during the processing stage, result in poor display quality and yield. Photolithography is the most common technique used to develop the electrode pattern on a transparent glass substrate. Nevertheless, poor lithography leads to display defects such as dead pixels, dark columns and bright horizontal rows. Moreover, shorts between anodes due to partial etching of the transparent conducting material or cathode lines are also common problems. Herein, we discuss a technique which drastically reduces the number of electrode shorts. Selective etching of the cathode in this technique makes the optical inspection of electrode shorts far easier due to the higher contrast ratio between Cr/glass compared to indium tin oxide/glass. Further, a focused laser beam is employed to ablate the identified shorts between two or more anode/cathode lines to make the short-free patterns. Additionally, a laser beam is also capable of isolating the burnt/dead pixels in a display, which otherwise lead to dark or bright lines during operation. Thus, our findings are very important for the display industry to develop defect-free panels and for the repair of certain operational defects to increase the production yield and lifetime.

Overcoming Challenges in OLED Technology for Lighting Solutions

“…In such cases, ensuring high-quality TCO and adopting careful cleaning practices are possible solutions to mitigate this issue. Other sources of abrupt failure include the presence of metal particles or short circuits in the metal grid, due to mask misalignment or improper patterning during the photolitography phase [215]; these issues can be mitigated through proper etchant preparation, substrate and photomask cleaning, and careful alignment. Similarly, it is crucial to pay attention to the deposition environment and maintain the proper care of all machinery.…”

Simple-structure color-tunable fluorescent organic light-emitting devices with chromaticity difference beyond five-step McAdam ellipses

“…Recently, organic light-emitting devices (OLEDs) have been widely used in the field of lighting and display, such as smart phones, TVs and wearable devices, owing to their characteristics of flexibility over large-areas, self-luminescence and many other advantages [1][2][3][4][5]. High efficiency and stable spectra are 1 These authors contributed equally to this work.…”