An Approach of Vibration Compensation for Atomic Gravimeter under Complex Vibration Environment

Abstract

Atomic gravimeter has been more frequently applied under complex and dynamic environments, but its measurement accuracy is seriously hampered by vibration-induced noise. In this case, vibration compensation provides a way to enhance the accuracy of gravity measurements by correcting the phase noise that resulted from the vibration of a Raman reflector, and improving the fitting of an interference fringe. An accurate estimation of the transfer function of vibration between the Raman reflector and the sensor plays a significant role in optimizing the effect of vibration compensation. For this reason, a vibration compensation approach was explored based on EO (equilibrium optimizer) for estimating the transfer function simplified model of a Raman reflector, and it was used to correct the interference fringe of an atomic gravimeter. The test results revealed that this approach greatly restored the actual vibration of the Raman reflector in a complex vibration environment. With a vibration compensation algorithm, it achieved the correction and fitting of the original interference fringe. In general, it dramatically reduced the RMSE (root mean square error) at the time of fitting and significantly improved the residual error in the gravity measurement. Compared with other conventional algorithms, such as GA (genetic algorithm) and PSO (particle swarm optimization), this approach realized a faster convergence and better optimization, so as to ensure more accurate gravity measurements. The study of this vibration compensation approach could provide a reference for the application of an atomic gravimeter in a wider and more complex environment.

Advances in Portable Atom Interferometry-Based Gravity Sensing

“…It is expected that several of the physics improvements described here will not be present in the first generation of portable systems, but in later generations of portable CAGs. Additive manufacturing (e.g., 3D printing) [135][136][137]163,164] Beam shaping (e.g, Top hat) [139] Clean atom sources [165][166][167] Compact 2D MOTs [168,169] Compact laser systems [170,171] Micro-fabricated components [172] Metasurfaces [173,174] Compact spectroscopy cells [175][176][177][178] Optimised Coil systems [140,179,180] Optimised electronics [181,182] Passive vacuum systems [132,183] Vacuum compatible anti reflection coatings [138] Vibration Compensation [104,142,184]…”