An algorithm for coupling multibranch in vitro experiment to numerical physiology simulation for a hybrid cardiovascular model

Abstract

The hybrid cardiovascular modeling approach integrates an in vitro experiment with a computational lumped‐parameter simulation, enabling direct physical testing of medical devices in the context of closed‐loop physiology. The interface between the in vitro and computational domains is essential for properly capturing the dynamic interactions of the two. To this end, we developed an iterative algorithm capable of coupling an in vitro experiment containing multiple branches to a lumped‐parameter physiology simulation. This algorithm identifies the unique flow waveform solution for each branch of the experiment using an iterative Broyden's approach. For the purpose of algorithm testing, we first used mathematical surrogates to represent the in vitro experiments and demonstrated five scenarios where the in vitro surrogates are coupled to the computational physiology of a Fontan patient. This testing approach allows validation of the coupling result accuracy as the mathematical surrogates can be directly integrated into the computational simulation to obtain the “true solution” of the coupled system. Our algorithm successfully identified the solution flow waveforms in all test scenarios with results matching the true solutions with high accuracy. In all test cases, the number of iterations to achieve the desired convergence criteria was less than 130. To emulate realistic in vitro experiments in which noise contaminates the measurements, we perturbed the surrogate models by adding random noise. The convergence tolerance achievable with the coupling algorithm remained below the magnitudes of the added noise in all cases. Finally, we used this algorithm to couple a physical experiment to the computational physiology model to demonstrate its real‐world applicability.

Virtual and Artificial Cardiorespiratory Patients in Medicine and Biomedical Engineering

“…This new approach was further developed to enable more complex experiments [41]. As the absence of real-time calculations is the main advantage of this approach, hardware bandwidth limitations have minimal restraint.…”

Mock circulatory loops used for testing cardiac assist devices: A review of computational and experimental models

“…This interface is similar to others, instead, SVR was adjusted to elicit changes in vasculature pressure. [104][105][106] Recently, Mirzaei et al 107 studied the coupling of a physical experiment with multiple branches with a lumped parameter computer simulation. The numerical-hydraulic interface has been tested to show its applicability, however, has not been used to study CADs yet.…”

A New Cardiovascular Mock Loop Driven by Novel Active Capacitance in Normal and Abnormal Conditions

“…Furthermore, the direct supply of LVQ using a gear pump was inconsistent with the physiological properties of the CVS. Mirzaei et al [26] developed a convergence technique to simulate stenosis in the CVS. Although their results were promising, the convergence process did not allow for real-time control and application.…”