An accelerated thrombosis model for computational fluid dynamics simulations in rotary blood pumps

Abstract

Thrombosis is one of the major complications in blood-carrying medical devices and a better understanding to influence design of such devices is desirable. Over the past years many computational models of thrombosis have been developed. However, open questions remain about the applicability and implementation within a pump development process. The aim of the study was to develop and test a computationally efficient model for thrombus risk prediction in rotary blood pumps. We used a two-stage approach to calculate thrombus risk. At the first stage, the velocity and pressure fields were computed by computational fluid dynamic (CFD) simulations. At the second stage, platelet activation by mechanical and chemical stimuli was determined through species transport with an Eulerian approach. The model was implemented in ANSYS CFX and compared with existing clinical data on thrombus deposition within the HeartMate II. Our model shows good correlation (R2>0.94) with clinical data and identifies the bearing and outlet stator region of the HeartMate II as the location most prone to thrombus formation. The calculation of platelet activation requires an additional 10-20 core hours of computation time. The concentration of activated platelets can be used as a surrogate marker to determine risk regions of thrombus deposition in a blood pump. Model expansion, e.g. by including more chemical species can easily be performed. We make our model openly available by implementing it for the FDA benchmark blood pump.

Investigation of turbulent flow field in maglev centrifugal blood pumps of CH-VAD and Heartmate III using large-eddy simulation

“…Larger clearance not only reduces visocus stress inside the clearance, but also cause stronger secondary ows. Furthermore, as some recent studies showed (Olia 2023;Blum et al 2023), contemporary blood pumps are consistently used across a large operating range, and not just solely clustered around their optimal design point, with majority of off-design operation is at lower ow rates, across all patient size populations (not just pediatrics). Lower ow rates lead to longer blood exposure times in current rotary blood pumps withevidence of clinical implications.…”

Study on the optimal elastic modulus of flexible blades for right heart assist device supporting patients with single-ventricle physiologies

“…Its calculation method is shown in Equation 7. An accelerated thrombus formation model is utilized to quantitatively assess the thrombus risk (27). This model includes three convection-diffusion equations (Equations 8-10), describing the generation and transport of non-activated platelets (NP), activated platelets (AP), and adenosine diphosphate (ADP).…”