Ammonium sulphate and/or ammonium bisulphate as extracting agents for the recovery of aluminium from ultrafine coal fly ash

Abstract

Highlights Aluminium was extracted from an ultrafine coal fly ash  Ammonium sulphate and ammonium bisulphate were used as extracting agents  A process of thermochemical treatment followed by aqueous leaching was employed  A maximum non-selective recovery of 46.6% aluminium was obtained  Selective extraction of aluminium (37.3%) over silicon and iron was achieved AbstractWe recently showed that the selective extraction of aluminium from the amorphous phase of a South African ultrafine coal fly ash can be achieved via thermochemical treatment with ammonium sulphate for 1h followed by aqueous dissolution, as an alternative to conventional hydrometallurgical processes. In this study, insight gained from the previous work was applied to investigate and compare total vs selective aluminium extraction efficiencies using ammonium sulphate or ammonium bisulphate either on its own, or as a mixture of the two salts as extracting agents during a 2h thermal treatment process. The effects of (i) ash-to-extractant mass ratio and (ii) temperature during thermal treatment on extraction efficiency was investigated. While a maximum, but non-selective, recovery of 46.6% total aluminium was achieved using ammonium bisulphate at 400 °C, the most technically appropriate results for selective recovery yielded 37.3% aluminium, with only 0.3% silicon, 0.1% titanium and 3.9% iron having been co-extracted when using ammonium sulphate at a processing temperature of 600°C. Extraction of most of the calcium and magnesium could not be prevented. Using mixtures of ammonium salts as extracting agents during 2 thermochemical treatment may however introduce technical difficulties on large scale. Our results indicate that any of the two ammonium salts could be used on their own during thermochemical treatment.Thermochemical treatment of coal fly ash using ammonium salts may therefore represent a promising technology for extracting aluminium from South African coal fly ash.

Possibility of obtaining high-alumina materials from industrial wastes of ceramic and refractory industry (Review)

“…Избавиться от «родовых» особенностей состава и структуры глинозема, полученного вариантами схемы Байера / Байера-спекание, можно использованием комплексных щелочно-кислотных способов переработки исходного алюмосодержащего сырья [48][49][50][51] и «кислых» способов, основанных на выщелачивании катиона алюминия из исходных минералов растворами минеральных кислот или кислых солей [52][53][54][55][56][57][58][59][60][61][62][63][64][65]. К основным преимуществам этих методов относятся:…”

The Behaviour of Rare Earth Elements from South African Coal Fly Ash during Enrichment Processes: Wet, Magnetic Separation and Zeolitisation

“…Other applications include CFA utilisation for mine back-filling, as well as agricultural remediation of soil and water treatment using modified CFA [17,23]. Another major area of research in CFA valorisation is the production of value-added, porous materials such as zeolites (i.e., zeolitisation) as well as metal extraction/recovery [24][25][26][27][28][29][30][31][32][33][34][35]. As South Africa is largely reliant on coal for energy production [15], CFA research and the development of various CFA valorisation technologies remain major priorities.…”

Alumina Extraction from Coal Fly Ash via Low-Temperature Potassium Bisulfate Calcination

“…With this method, the Al extraction rate under optimized conditions was 90.11% [28]. Van der Merwe et al [29] used either ammonium sulfate or ammonium bisulfate or a mixture of the two salts as an extracting agent for recovering aluminum from ultrafine CFA during a 2-h thermal treatment process at different processing temperatures.…”