Ammonium Polyphosphate Reinforced E-Glass/Phenolic Hybrid Composites for Primary E-Vehicle Battery Casings –A Study on Fire Performance

Experimental investigations of thermal solutions to increase heat transfer rate by utilizing the effects of pitch ratio and length

“…Compared to other numerical simulations, the increase in f from PR4.4 to PR2.3 and PR2.6 to PR1.9 is rather significant. PR1.5 had the greatest f at 0.20 at Re = 7000 and f/f0 at Re = 29000 22 .…”

Effects of machining parameters on surface quality of composites reinforced with natural fibers

“…Peel-up failure mode happened on the work product's entry plane after machining operations on NFRC specimens 19 . It typically occurs whenever the tool strikes the analysis process, causing increased pressure on the composite and results damaging cut's or outer slot's border produced by fiber splitting, bent tears, and stress fractures 20 . The sharp tool of an instrument will remove material from the workpiece, which will then be attempted to be pulled up, resulting in a peel 22 .…”

Influence of gasoline on high speed evaporation gasoline sprays: a large-eddy model of sprayer a with different fuels

“…Apart from the spraying line, the similarity is fairly excellent. The divergence in RMS values is attributed to the decreasing statistical relationship in the geographic average as the quantity of cells reduces even as the spraying line approaches 27 . Figure 1 depicts the energy intensity field, which drops at t = 0.5 ms.…”