Actuator control using TCP IP communication under LabVIEW USB6001 environment

Abstract

This article introduces a basic LED control using the USB6001 hardware, which is a LabVIEW product. It may be thought of as an extension device for real-time testing of simulation results. LabVIEW2014 is the software used. TCP is the communication technique, which has already been incorporated in LabVIEW via one of the communication modules. It might also be done on the same platform. There are two objects in this article, a server and a client, that may transport data or messages between these two applications. The Transmission Control Protocol governs the transmission process.

Research on a quality detection system of dust suppression spraying for railway coal transportation using laser backscattering technology

“…What the system software development platform adopted is LabVIEW software, adopting the common method of while loop and conditional structure. In terms of timeout branch of the conditional structure, the system software adopts the state machine scheme to deal with the problems of system initialization, waiting state, data receiving and sending, and program shutdown [20]. The host computer is connected to the DAM0222 controller through the 485 to USB communication line, and the MODBUS RTU communication protocol is used in the internal.…”