Acoustic Wave Reflection in Water Affects Underwater Wireless Sensor Networks

Abstract

The phenomenon of acoustic wave reflection off fluid–solid surfaces is the focus of this research. This research aims to measure the effect of material physical qualities on oblique incidence acoustic attenuation across a large frequency range. To construct the extensive comparison shown in the supporting documentation, reflection coefficient curves were generated by carefully adjusting the porousness and permeability of the poroelastic solid. The next stage in determining its acoustic response is to determine the pseudo-Brewster angle shift and the reflection coefficient minimum dip for the previously indicated attenuation permutations. This circumstance is made possible by modeling and studying the reflection and absorption of acoustic plane waves encountering half-space and two-layer surfaces. For this purpose, both viscous and thermal losses are taken into account. According to the research findings, the propagation medium has a significant impact on the form of the curve that represents the reflection coefficient, whereas the effects of permeability, porosity, and driving frequency are relatively less significant to the pseudo-Brewster angle and curve minima, respectively. This research additionally found that as permeability and porosity increase, the pseudo-Brewster angle shifts to the left (proportionally to porosity increase) until it reaches a limiting value of 73.4 degrees, and that the reflection coefficient curves for each level of porosity exhibit a greater angular dependence, with an overall decrease in magnitude at all incident angles. These findings are given within the framework of the investigation (in proportion to the increase in porosity). The study concluded that when permeability declined, the angular dependence of frequency-dependent attenuation reduced, resulting in iso-porous curves. The study also discovered that the matrix porosity largely affected the angular dependency of the viscous losses in the range of 1.4 × 10−14 m2 permeability.

Optimal path selection and secured data transmission in underwater acoustic sensor networks: LSTM-based energy prediction

“…Because of the mobility of the nodes, communication between nodes in UASNs is extremely difficult. To avoid packet loss and malicious activity from affecting a node, it is critical to create a unique secure transmission mechanism [ 13 – 15 ]. Malicious nodes that do not forward a packet can also degrade network performance.…”

Enhancement of Precise Underwater Object Localization

“…In the field of UWSNs, there has recently been a surge in the amount of interest in using distributed antenna systems to connect to wireless communication networks. In a WSN, individual antennas are dispersed and connected by UWANs, an external connection that connects sensor nodes via radio (Carroll et al, 2014;Sathish, Hamdi, Chinthaginjala Venkata, Alibakhshikenari, et al, 2023;Sathish, Ravikumar, et al, 2023). Two or more of the internal sensor components of a sub-merged or acoustically isolated by cluster and cluster head sensors followed by sink and base station, as shown in Figure 2.…”

“…Similarly, optical signals are attenuated and dispersed significantly in aquatic environments (J. Luo et al, 2018;Sathish, Hamdi, Chinthaginjala Venkata, Alibakhshikenari, et al, 2023;Sathish, Ravikumar, et al, 2023;J. Yang et al, 2015).…”

“…This goal can be accomplished through the use of specialized software. Because it is impossible to save all of the data under these circumstances, the data must be processed as quickly as possible (Mahmood et al, 2013;Sathish, Hamdi, Chinthaginjala Venkata, Alibakhshikenari, et al, 2023;Sathish, Ravikumar, et al, 2023). Processing high-velocity data at a higher rate is therefore required for data mining.…”

Analysis and Application of the Electromagnetic Wave Propagation, Fields, and Dispersion Relation in an Elliptical Chiro Plasma Waveguide Immersed in Magnetized Plasma

“…Furthermore, "underwater wireless sensor network performance analysis using diverse routing protocols" has been studied (Sathish, Ravikumar, et al, 2022). However, many researches and studies have been done in the field related to sensors (Sathish, Anbazhagan, et al, 2022;Sathish, Hamdi, Chinthaginjala Venkata, et al, 2023). Chiral media can be utilized in chiral sensing devices.…”