Acetylated African Oil Bean Seed Pod For Crude Oil Spill Mop

Abstract

Oil spill remediation has continued to be a challenge in the world today. Thus efforts are still been made to develop more efficient oil spill mop up techniques. Natural adsorption with agricultural wastes, which otherwise constitute environmental pollution, has become an attractive technique for oil spill mop. Acetylation using acetic anhydride with iodine catalyst was carried out to improve the hydrophobicity of African oil bean seed pod (AOBSP), which is a lignocellulosic material and as such is naturally hydrophilic. Characterization of the raw and acetylated AOBSP were done using SEM, BET and FTIR analyses. Batch crude oil sorption tests were performed using both the raw and acetylated AOBSP. Isotherm, kinetic and thermodynamic studies were also carried out. FTIR analysis showed evidence of successful acetylation of AOBSP and adsorption of crude oil onto the raw and acetylated AOBSP. SEM and BET analyses showed improvement of the surface properties of AOBSP by the acetylation process. The BET surface area increased from 226.4 m2/g for the raw AOBSP to 310.0 m2/g for the acetylated AOBSP. Oil sorption was found to be by monolayer coverage, with monolayer sorption capacity of 5000mg/g and 12500mg/g for raw and acetylated AOBSP, respectively. The rate-controlling mechanism for the sorption processes was chemisorption. Negative values of ΔGo, ΔHo and ΔSo were obtained, showing that the sorption processes were feasible, spontaneous and exothermic, with a degree of orderliness at the solid–mixture interface. The results obtained from this study show that both raw and acetylated AOBSP are efficient oil sorbents with potentials for further improvement for oil spill mop.