Accident Detection and Emergency Alerting System for Road Safety

Borikar, Dilipkumar A.

doi:10.21786/bbrc/13.14/60

“…When the system detects an accident, it alerts the nearest emergency station like police administration, healthcare service, and ambulance operators of the same. It also provides real-time tracking for these emergency service providers [4]. The proposed system will check whether an accident has occurred and notify the nearest medical centers and registered mobile numbers about the place of the accident using GSM and GPS modules.…”

Section: Literature Reviewmentioning

confidence: 99%

Accident Detection System with GPS, GSM, and Buzzer

2023

JCTCSR

0

View full text Add to dashboard Cite

With vehicles becoming increasingly affordable, there has been a surge in the number of vehicles on the roads on an average all over the world. The swift development of technology and infrastructure has made our lives easier nowadays. The initiation of technology has likewise increased the traffic hazards and road accidents take place regularly, which causes massive loss of life and property because of the poor emergency facilities. Accidents bring devastation upon victims, causing the loss of precious time and money. It has been established, after extensive research, that a majority of accidents become fatalities because of a lack of communication to the concerned medical authorities and the consequent lack of immediate medical support. An accelerometer can be used in this research as a rollover or crash detector of the vehicle during and after a crash. Likewise, the vibration sensor can be used in research in order to check the vibration rates of any car. By monitoring the information from the accelerometer and the vibration sensor, a severe accident can be recognized. It then sends the alert message through the GSM Module, including the latitude and longitude data provided by the GPS module, to the police control room, any rescue team, or to the car owners. So, the police can immediately trace the location where the accident has occurred and necessary action can be taken after receiving the emergency message. This system can prove to be a lifesaver in isolated areas where an accident has occurred and no one is around in order to report the accident. Through this system, an accident can be detected and a life can be saved by the quick response from the emergency services.

show abstract

“…The system notifies the closest emergency station, such as the police administration, medical service, and ambulance operators, of an accident when it is detected. Additionally, it offers these emergency care providers real-time tracking [4]. Using GSM and GPS modules, the proposed system will determine whether an accident has occurred and alert the closest medical facilities and registered cell numbers about the location of the accident.…”

Section: Related Workmentioning

confidence: 99%

Design and Simulation of a GSM, Buzzer, and GPS Module-Based Accident Detection System

Falalu,

Umar,

Ibrahim

et al. 2023

IJISI

1

0

View full text Add to dashboard Cite

The average number of automobiles on the roads around the world has increased as cars become more and more accessible. Our lives are now easier because to the technology and infrastructure that are developing quickly. Technology has also increased the frequency of traffic risks and road accidents, which result in significant loss of life and property due to inadequate emergency resources. Accidents wreak havoc on victims, costing them valuable time and money. It has been determined via considerable research that the majority of accidents result in fatalities as a result of poor communication with the relevant medical authorities and the ensuing dearth of prompt medical assistance. In this study, an accelerometer can be applied as a rollover or crash detector for the car both during and after a collision. The vibration sensor can also be employed in research to measure the vibration rates of any vehicle. A serious accident can be identified by keeping an eye on the information from the accelerometer and vibration sensor. The police control center, any rescue team, or the owners of the vehicle are then sent the alert message via the GSM module, together with the latitude and longitude information provided by the GPS module. As a result, as soon as they receive the emergency notification, the police can locate the accident's site and take the appropriate action. When an accident occurs in a remote place and no one is available to report it, this technique may prove to be a lifesaver. By responding quickly, the emergency services can prevent an accident from happening and save a life

show abstract

“…The system notifies the closest emergency station, such as the police administration, medical service, and ambulance operators, of an accident when it is detected. Additionally, it offers these emergency care providers real-time tracking [6]. Using GSM and GPS modules, the proposed system will determine whether an accident has occurred and alert the closest medical facilities and registered cell numbers about the location of the accident.…”

Section: Related Workmentioning

confidence: 99%

Design and Simulation of a GSM, Buzzer, and GPS Module-Based Accident Detection System

2023

J Math Techniques Comput Math

1

0

View full text Add to dashboard Cite

The average number of automobiles on the roads around the world has increased as cars become more and more accessible. Our lives are now easier because to the technology and infrastructure that are developing quickly. Technology has also increased the frequency of traffic risks and road accidents, which result in significant loss of life and property due to inadequate emergency resources. Accidents wreak havoc on victims, costing them valuable time and money. It has been determined via considerable research that the majority of accidents result in fatalities as a result of poor communication with the relevant medical authorities and the ensuing dearth of prompt medical assistance. In this study, an accelerometer can be applied as a rollover or crash detector for the car both during and after a collision. The vibration sensor can also be employed in research to measure the vibration rates of any vehicle. A serious accident can be identified by keeping an eye on the information from the accelerometer and vibration sensor. The police control center, any rescue team, or the owners of the vehicle are then sent the alert message via the GSM module, together with the latitude and longitude information provided by the GPS module. As a result, as soon as they receive the emergency notification, the police can locate the accident's site and take the appropriate action. When an accident occurs in a remote place and no one is available to report it, this technique may prove to be a lifesaver. By responding quickly, the emergency services can prevent an accident from happening and save a life.

show abstract

Accident Detection and Emergency Alerting System for Road Safety

Cited by 4 publications

References 1 publication

Accident Detection System with GPS, GSM, and Buzzer

Accident Detection System with GPS, GSM, and Buzzer

Design and Simulation of a GSM, Buzzer, and GPS Module-Based Accident Detection System

Design and Simulation of a GSM, Buzzer, and GPS Module-Based Accident Detection System

Contact Info

Product

Resources

About