Accelerometer Implementation as Feedback on 5 Degree of Freedom Arm Robot

Abstract

The research investigated the automatic control system implemented with the 5 DOF (Degree of Freedom) arm robot control system using the closed-loop control method with the MPU 6050 sensor, which integrated the rotation of the MG995 motor servo as a feedback function. The control of this robot used android-based application, in which the app sends data of the rotate angle for each servo motor rotated to a certain angle. The HC -05 Bluetooth received the data and the Arduino UNO R3 microcontroller processed them. The microcontroller managed every rotation of each servo motor that integrated with an MPU6050 sensor with serial monitor communication to display the rotation of each servo motor. The test results obtained by the standard deviation value showed how large the sample diversity was. The result of this study showed a standard deviation correlation with the number of sample diversity. The higher the standard deviation value, the more sample data spread (data diverse or varies). Otherwise, the smaller the standard deviation value, the more homogenous the sample data. If the standard deviation equals zero, it indicates that the sample has identical data. The highest standard deviation value from servo motor 1 is 5.20, servo motor 2 and 3 are 1.00, servo motor 4 is 2.89, and servo motor 5 is 2.9.

Parameter-Tunable RBF Neural Network Control Facing Dual-Joint Manipulators

“…When studying the control of the manipulator system, it is first necessary to study the dynamics modeling and kinematics analysis of the manipulator. As a theoretical basis for the study of the manipulator system, the dynamic modeling of the manipulator provides a dynamic model for the subsequent high-precision motion control of the manipulator end effector by making reasonable simplified assumptions for the actual manipulator system [16]. e kinematics analysis of the manipulator system is to establish the relationship between the manipulator joint variables and the end effector pose matrix by analyzing the two parts, including forward kinematics and inverse kinematics [17].…”

Fuzzy Logic Based Industrial Control System Design

“…Changing the algorithm is enough to change the program in the microcontroller which is relatively easier than changing the hardware. In this study we used the AT89S52 Microcontroller which is a family of MCS '51 [35]- [38].…”

Automatic Wireless Nurse Caller

“…The LED as an indicator and the buzzer as an alarm was then active/ON. When the stop button was pressed, the HM-10 Bluetooth transmitter [28] sent a signal, and it was received by the HM-10 Bluetooth receiver [29]. The characters or numbers on the LCD was deleted, and the LED indicator and buzzer alarm turned off.…”