Absorber Length Optimization of On-Chip Colliding Pulse Mode-Locked Semiconductor Laser

Abstract

We present theoretical and experimental results regarding the saturable absorber length optimization for the generation of stable mode-locked regimes of a novel on-chip colliding pulse mode-locked semiconductor laser structure. We have been able to apply the design criteria acquired from previous theoretical and experimental reports to define a suitable gain section length for a given saturable absorber section length. The latter is independent from the cavity length and allows obtaining stable mode-locked regimes with the required repetition rate and pulse width in the range of picoseconds for different applications. We have developed four on-chip colliding pulse mode-locked laser structures with saturable absorber lengths ranging from 20 to 50 µm in steps of 10 µm with fundamental repetition rate at 25 GHz and twice this frequency at 50 GHz when operated in the colliding pulse modelocked regime. The theoretical study was carried out by using the simulation tool called FreeTWM which is a free travelling wave model software designed for the study of the dynamics of multisection semiconductor lasers, while the experimental analysis was executed on the samples fabricated on a generic InP photonic integrated technology through a multi-projectwafer run. Index Terms-Laser mode locking, optical pulse generation, semiconductor lasers, quantum well lasers, semiconductor device modeling.Carlos Gordón (M'16) is with the Universidad Técnica de Ambato, Ambato, Ecuador, where he has been a Research Professor since 2005. His current research interests include semiconductor short pulse laser systems and robotics.Myriam Cumbajín (M'17) is with the Universidad Tecnológica Indoamérica, Ambato, Ecuador, where she has been a Research Professor since 2017. Her current research interests include semiconductor short pulse laser systems and renewable energy.Guillermo Carpintero (M'01) is an Associate Professor of the Electronic Technology Department, Universidad Carlos III de Madrid. His current research interests include mode-locked lasers, optical frequency synthesis, photonic integrated circuits, and photonic enabled broadband wireless systems. Erwin A. J. M. Bente

Measurements and Modeling of a Monolithically Integrated Self-Spiking Two-Section Laser in InP

“…For example, a minor change of a few percent of the saturable absorber and gain length ratios and carrier lifetimes may already affect the stability, modulation depth and pulse width of a mode-locked laser [28]. In addition, also the timebandwidth product and side mode suppression ratio depend on the saturable absorber and gain length ratio, as demonstrated in the InP technology platform [29]. Another dynamical property of these types of lasers is excitability.…”

Hybrid modeling approach for mode-locked laser diodes with cavity dispersion and nonlinearity

“…A simulation time of 100 ns (260 roundtrips) was used with a 20 fs stepsize. The model parameters are based on earlier work 48 , 52 , 53 and are listed in Table 1 . The real part of the nonlinear coefficient , with the material nonlinear coefficient and the effective mode area.…”

Tracking of Gaussian pulse release length inside mode-locked semiconductor laser amplifier

“…This was the reason why everything that took place was due to this. These genetic modifications of the time domain, which correlate to the light pulses [19], [20]. In this study, we will investigate the influence that the length of the tracking parameter has on the form and temporary electric field distribution of a laser mode-locked system where the pulse width (τp) is greater than the carrier lifetime (τc) both before and after the amplification process.…”