A wideband array antenna with beam‐steering capability using real valued weights

Abstract

This article presents an array antenna with beam‐steering capability in azimuth over a wide frequency band using real‐valued weighting coefficients that can be realized in practice by amplifiers or attenuators. The described beamforming scheme relies on a 2D (instead of 1D) array structure in order to make sure that there are enough degrees of freedom to realize a given radiation pattern in both the angular and frequency domains. In the presented approach, weights are determined using an inverse discrete Fourier transform (IDFT) technique by neglecting the mutual coupling between array elements. Because of the presence of mutual coupling, the actual array produces a radiation pattern with increased side‐lobe levels. In order to counter this effect, the design aims to realize the initial radiation pattern with a lower side‐lobe level. This strategy is demonstrated in the design example of 4 × 4 element array. © 2005 Wiley Periodicals, Inc. Microwave Opt Technol Lett 48: 287–291, 2006; Published online in Wiley InterScience (www. interscience.wiley.com). DOI 10.1002/mop.21329

Frequency scannable stacked patch antenna for beam‐steering applications

“…It is due to that at such a location, the objective signal is usually degraded by interference signals coming from different directions and use of a beam‐steering antenna can effectively suppressing such interference. Conventionally, the beam‐steering antennas had been realized by a multielement array which either has a set of directive antennas connected by a switching network or is a phased array with a large number of electronically controlled phase shifters . This is undoubtedly leading them to more complex and expensive for practical application.…”

Refinement Method for Weighting Scheme of Fully Spatial Beamformer

“…In the part of signal processing, weighting coefficients are calculated using two-dimensional Inverse Discrete Fourier Transform (IDFT) technique applied to the required radiation pattern. The obtained weighting coefficients become real values which can be simply realized by attenuators or amplifiers [11][12][13]. The main advantage of this wideband spatial beamformer is that its design does not require phase shifters, delay circuits, or frequency filters.…”

Dielectric resonator antenna for millimeter wave applications

“…It is due to that at such a location, the objective signal is usually degraded by interference signals coming from different directions and use of a beamsteering antenna can effectively suppressing such interference. Conventionally, the beam-steering antennas had been realized by a multielement array which either has a set of directive antennas connected by a switching network [1][2][3][4] or is a phased array with a large number of electronically controlled phase shifters [5][6][7]. This is undoubtedly leading them to more complex and expensive for practical application.…”