A two-step UV curing process for producing high tensile stressed silicon nitride layers

Abstract

This experimental study presents a comparison of differently tensile stressed silicon nitride (SiN) layers and their response to irradiation in a vacuum ultraviolet (VUV) curing system. Therefore, three types of silicon nitride with initial stress levels of 450 MPa, 700 MPa and 980 MPa were deposited by plasma enhanced chemical vapor deposition (PECVD). In contrast to industrial standard VUV curing with broadband lamps 220 nm radiation wavelengths, we analyzed the effects of curing with single wavelengths at 172 nm and 222 nm. The samples were characterized by Fourier Transform Infrared Spectroscopy, ellipsometry, and wafer bow measurement. It could be shown that high energy photons are able to dehydrogenize SiN films more than lower energetic photons compared with lower Si-N-Si crosslinking effects. Furthermore, we could show that a dual combined 172 nm and 222 nm VUV curing procedure can produce films with very low hydrogen concentration and high percentage of struct ural units consisting of Si-N-Si bonds. In conclusion of this study, an up to +900 MPa stress increasing process could be established