A Three-Dimensional Analytical Solution for Reservoir Expansion, Surface Uplift and Caprock Stress Due to Pressurized Reservoirs

Abstract

An analytical solution is presented for the displacement, strain and stress of a three-dimensional poro-elastic model with three layers, where the three layers are an underburden, a reservoir with a given fluid pressure, and an overburden. The fluid pressure in the reservoir is assumed symmetrical around the z-axis and represented by a Fourier cosine series. The poro-elastic solution is expressed as a superposition of the solutions for each term in the Fourier series. It is shown that the bulk strain in the reservoir layer is proportional to the fluid pressure and that the bulk strain in the underburden and overburden is zero. Using these properties of the bulk strain, a solution is derived for the three-layer model where the fluid flow and mechanics are fully coupled. A particular aim of the model is to study the surface uplift from a given reservoir pressure. The expansion of the reservoir and the uplift of the surface are studied in terms of the wavelengths in the Fourier representation of the pressure. It is shown that the surface uplift can be written in a similar form to the 1D vertical expansion of the reservoir layer, but where the fluid pressure is based on the Fourier series. It is shown that the amplitudes with average wavelengths longer than 2π times the thickness of the reservoir give expansion of the reservoir, but average wavelengths much shorter than this limit do not. Similarly, amplitudes with average wavelengths much longer than 2π times the thickness of the overburden produce surface uplift, but wavelengths much shorter do not. The stress in the overburden, which is generated by the reservoir fluid pressure, is also analysed in terms of the wavelengths. A case is given where the analytical uplift is compared with the results of a numerical simulation and the agreement is excellent.

Stress changes caused by exsolution of magmatic fluids within an axisymmetric inclusion

“…This happens when no variations of pore pressure and temperature occur in the external region, as expected in geothermal environments (e.g. Guido et al 2015;Wangen & Halvorsen 2020), where the reservoir, that is the inclusion, is hydraulically confined. Accordingly, the timescale for fluids to diffuse outside V S is much longer than the one needed to diffuse within V S .…”

Intelligent element: Coupling Green function approach and artificial intelligence to reduce discretization effort

“…19,20,24 simplified the problem by considering the reservoir embedded in a linear elastic homogeneous semi-infinite medium. Du and Olson, 25 Mehrabian and Abousleiman, 26 Wangen and Halvorsen 27 developed analytical models for the analysis of displacement and strain fields in a massif with three layers of different materials. In these works, the perturbation in the massif was caused by the axisymmetric variation of pore pressure in a cylindrical reservoir.…”

Integrating Artificial Neural Networks and Green S Function Approach for Geomechanics Application

“…Another approach often discussed in literature is the use of the Eshelby inclusion (ESHELBY, 1957) approach as discussed by Walsh (2002). These various approaches are equivalent as pointed out by Rudnicki (2011).…”